Christmas 2020 (part C)
2020 haven't been a load of fun, but at least it'll be Christmas soon - so why not celebrate by putting together an over-designed PCB tree powered by an Arduino Nano. Requires parts A, B and C in order to actually blink anything since the active parts of the electronics are hidden in the base (part C). The switch on this part is used by the Arduino sketch in order to change the way the LED blinks, but as the code is supplied you could always make it do whichever pattern you want.
A short video can of the completed project can be seen below, but note that the audio have been added in order to cover up the sounds of my puppy. Maybe I'll do a Christmas 2021 version with some sort of audio component, but that christmas is still more than a year away!
Christmas 2020 (part C)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(6)
- 2 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
3content
-
9design
-
9usability
-
10creativity
-
10content
More by Tor-Eirik Bakke Lunde
-
LED Tuning Board
If you were to take a look at my shared projects, you'll find that for someone who doesn't actually ...
-
BulkyMIDI-32 Extras
BulkyMIDI-32 is based on the mt32-pi project, bringing you the all the auditory excellence that was ...
-
ZX Interface 2.021
I've grown fond of cartridge formats in my later years, mostly because of the feeling you get by bro...
-
MSX Mega Drive Adapter
I've been playing around with my MSX computer recently, and as the computer itself supports a two bu...
-
C64 Joystick Adapter (Faceplate)
A rather stylish looking faceplate to go with the C64 Joystick Adapter, it covers up most of the ele...
-
C64 Joystick Adapter
I recently bought a Raspberry Pi for use with emulators on modern systems, and so I wanted an easy w...
-
CPC464 Joystick Splitter (Faceplate A1)
I made a simple joystick splitter for the Amstrad CPC 464 on a simple PCB, so I thought - why not ma...
-
CPC464 Joystick Splitter
Simple passive device that breaks out the joystick port on the Amstrad CPC 464 computer so that two ...
-
Apple 2 Prototyping Card (fullsize)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
Apple 2 Prototyping Card (small)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
C64 Pi1541-II Faceplate (variant B)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 JoyKEY (Sega Master System adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 JoyKEY (Atari 7800 adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 Pi1541-II Backplate
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Faceplate (variant A)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Module
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
Arcade 2040
Over the past few years I've been playing around with building new controllers for both modern and v...
-
BulkyModem (Commodore 64/128 UserPort Adapter)
This is an adapter for hooking up your BulkyModem or BulkyModem-32 to your Commodore 64/128. It take...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
