Materials You Need For Frets

• Basic Soldering Capabilities
• 24-26 AWG Stranded Wire
• 5x Kailh PG1350 (Choc V1) Switches
• 3D Printed Fret buttons for SPECIFIC GUITAR

Not all guitars share the same buttons

#8 or #10 Nylon Washers x1 FOR LP XP SG KMR

Washers not needed for WT/GH5

pictures differ since version updates and changes

Materials For LED Support

• 10x SK9822 or APA102 5050 Sized LED's
• Reflow Oven, Hot air station or Soldering Iron
• Low Temperature solder paste or solder
• Stencil is Optional but nice if doing multiple boards

The SK9822-EC20 Version is now deprecated since you can use the Brighter APA102/SK9822 5050 Style

You can still download all previous files for it in the given Zip folder, extract it and use as normal but no more support will be given for that file.

Also available: Detailed PDF Guide and Documentation for Soldering and usage in combination with Strum PCB available on my account.

What Guitars Does This PCB Support?

• Kramer
• SG
• XPlorer
• Les Paul
• World Tour
• Guitar Hero 5

This PCB comes with BOM and Centroid(Pick n Place) files to have it manufactured preassembled

Can I Use This Without LEDs?

Yes

The Nylon washer is used for the screw on side of the neck closest to the body, try to align the centered lines of the PCB to the center of your button, then snug up the screw on top of the washer without overtightening

Support is offered, this PCB has been tested With LEDs

you can message me on Discord @ Snare01

NOTE :

If this was sold to you as apart of a kit, Please contact the seller for hardware support I do not offer ANY support for this if its been sold to you

Recent update: fixed orientation of LEDs on PNP csv file

Trimmed PCB to fit PS3 LP and other guitars better