MOUSA Mousa - Simple Projects
UNITED STATES OF AMERICA • + Follow
Description
High voltage Probe
This is a DIY High Voltage Probe for multimeter that can using for measuring High voltage up to 20KV.
Parts List:
10M Resistor (97 pcs)
1M Resistor
4.7M Resistor
33K Resistor
47K Resistor
Connecting wires
YouTube Video: https://youtu.be/8m6HcwPwhw8
Circuit + 3D printer files: https://mousa-simple-projects.blogspot.com/2020/08/diy-high-voltage-probe.html
Aug 16,2020
3,455 views
High voltage Probe
2 Layers PCB 26 x 249 mm FR-4, 1.6 mm, 1, HASL with lead, Red Solder Mask, White silkscreen
High voltage Probe
3455
4
0
Published: Aug 16,2020
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(4)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by MOUSA Mousa - Simple Projects
-
3 phase Motor and Phase Sequence Indicator / Rotation Tester
This is a DIY Three Phase Sequence Indicator / Rotation Tester Circuit, 3D printed file and parts li...
-
Ultrasonic distance meter without microcontroller
This circuit is an ultrasonic distance meter without using microcontroller.Distance range for this c...
-
Digital Resistance Meter without microcontroller
Digital Resistance Meter without microcontrollerCircuit and parts list: https://mousa-simple-project...
-
Automatic Transfer Switch ATS / Changeover with 3 Input Sources
This circuit is an Automatic Transfer Switch ATS / Changeover with 3 Input Sources (3 ways).It has 3...
-
Full Array Local Dimming TV Backlight
This is a modification to convert an LED LCD TV to Full Array Local Dimming Backlight.Circuit and Pa...
-
Online UPS with Capacitors
This circuit is a short running time online UPS that used high voltage capacitors to stores energy, ...
-
Magnet Polarity detector
This circuit is a Magnet polarity detector using hall effect sensor IC W277.Circuit and Parts list: ...
-
LED Matrix and Lissajous pattern
This circuit is an LED matrix to draw Lissajous pattern/curve .Max frequency less than 10KHz (an edu...
-
DIY Transformerless inverter
This is a DIY Transformerless inverter, it can convert high DC voltage to AC Voltage with Pure sine ...
-
Unusual DIY Vibration Sensor using Analog Voltmeter !!
This circuit is an Unusual way to make Vibration Sensor or Shock Sensor using an Analog Voltmeter !!...
-
Active power factor correction
This project is Active Power Factor Correction Using MC33262 Circuit and parts list : https://mousa-...
-
LED Seven Segment Display Without IC
This circuit is a simple driver for seven segment display without using any IC.It can display 10 num...
-
Solar Inverter Without Battery
This circuit is a 1500W DIY Solar inverter that working without Battery, using solar panels only.Wit...
-
Thermo-Switch Gerber
This circuit is a thermoSwitch using a Thermocouple. It can switch ON/OFF a load when temperature ri...
-
Digital Electronic Tape Measure / Digital Rolling Ruler
This project is an electronic digital tape measure (rolling ruler) without using microcontroller.It ...
-
8-Channel Voltage Multiplexer for Oscilloscope
This electronic circuit is a voltage multiplexer for oscilloscope that helps you to measure 8 differ...
-
DIY Avoidance Sensor Module with better features
DIY Avoidance Sensor Module with better featuresYouTube video: https://youtu.be/hjLncqlu6DQCircuit d...
-
LED Chaser with 80 channels
LED Chaser with 80 channels using IC 4017YouTube video: https://youtu.be/0izldDmaTy0Circuit and part...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
22 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
164 1 1
