|
|
BTN7970B |
x 2 | |
|
|
SN74AHC244DWR |
x 1 | |
|
|
0603 package 1k |
x 8 | |
|
|
0603 package 100pF Capacitor |
x 2 | |
|
|
2x4 header |
x 1 | |
|
|
1x2 header |
x 2 |
Motor Drive Card
Motor driver card is a high power and high current driver card used in sumo and field robots. The motor driver board, which can operate under a supply voltage of up to 28V, can be used to control motors that draw up to 20 amps. It can be easily controlled with many microcontroller platforms, especially Arduino.
Engine and supply connections;
Vs: Supply Voltage (up to 28V)
GND: Feeding Ground
OUT-1 +: Motor + Tip
-OUT-2-: Motor-End
Control Pins;
- VCC: +5 VDC
- GND: Ground Connection
- IS1, IS2: Current Test Pins
- EN1, EN2: PWM inputs
- IN1, IN2: Motor direction control pins
Motor Drive Card
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Engineer
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
47 0 0 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
53 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
69 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
395 0 6 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
125 0 2
