Larry Athey
UNITED STATES OF AMERICA • + Follow
Description
RPi-Smart-Still_Version-1.2
Raspberry Pi hat for the RPi Smart Still controller system available from GitHub at https://github.com/larry-athey/rpi-smart-still
Raspberry PI and Arduino/ESP32 powered smart still controller system. Designed around the Still Spirits T-500 column and boiler, but can be easily added to any other gas or electric still with a dephlegmator.
Refer to the GitHub link in the above for more information and source code updates.
Schematic and Layout
Schematic Diagram
Schematic_RPI-Smart-Still-V1.2_2024-09-09.pdf
Sep 10,2024
293 views
end-flag
RPi-Smart-Still_Version-1.2
2 Layers PCB 95 x 100 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
Raspberry Pi hat for the RPi Smart Still controller system available from GitHub at https://github.com/larry-athey/rpi-smart-still
293
0
7
Published: Sep 10,2024
Download Gerber file 2
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/09/11 (GMT+8)
File update record
2024-09-1122:18:13
Gerber file is updated.
2024-09-1121:44:11
Gerber file is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(7)
- Likes(0)
More by Larry Athey
You may also like
-
Modifying a Hotplate to a Reflow Solder Station
140 0 1 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
107 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
345 4 1 -
How to measure weight with Load Cell and HX711
412 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
523 0 0
That's odd, I put 100x100 mm as the dimensions when I ordered them today. Where are you seeing 101? (I'm new here)
OK, I see it now. I've notified the contributor who did the board layout.
Not sure what to do, the contributor fixed the dimensions, but this page still says the same thing even after uploading the new Gerber file. I uploaded it to a test order at JLCPCB and it shows 100x95 there.
The page records the parameters you selected when placing your order, and at that time, the board outline size was still 101x95. Our programmer has now adjusted the board outline size to 100x95. Thank you.
Hi,the outline size is now 100x95mm
Thank you! I will keep that in mind in the future.