SNES2ATARI V2 for Atari 7800
GITHUB: https://github.com/nsinav/SNES2Atari
This is a working project. Games must be specifically coded to use the SNES controller. Example: Attack of the Petscii Robots for Atari 7800. Not tested on the Atari 8 Bits version.
Games working:
Attack of the PETSCII Robots (Atari 7800)
A.R.T.I. (Atari 7800)
Millie & Molly (Atari 7800)
We expect additional Atari 7800 games to add SNES2Atari support over time.
BOM
X1: Card Edge DB9 Female
E1: 1K Ohm 1/4W Resistor
U1: SNES Connector
For more information: https://7800.8bitdev.org/index.php/SNES2Atari
SNES2ATARI V2 for Atari 7800
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
-
Necroware S7-VRM (2024 Version)
Note from PCBWay: There are some problems in the BOM on the project page that cannot be resolved. If...
-
Kung Fu Flash 2 Cartridge for C64
ORIGINAL GITHUB: https://github.com/KimJorgensen/KungFuFlash2
-
Pico Nes v0.2 - A RP2040 NES
ORIGINAL GITHUB: https://github.com/fhoedemakers/pico-infonesPlus
-
Pico Nes v2.0 - A RP2040 NES
ORIGINAL GITHUB: https://github.com/fhoedemakers/pico-infonesPlus
-
SDrive-Simple-II
Original Website: https://ataribits.weebly.com/sdrive.html
-
RAMBO XL-II Atari 256K Upgrade V 1.1
This is a clone of the original ICD RAMBO XL 256K (64+192) memory upgrade suitable for either the 80...
-
OPL2LPT Replica
Original GITHUB: https://github.com/zjuyzj/OPL2LPT-ReplicaBill of MaterialComponentDesignatorQuantit...
-
Pico Nes v2.1 - A RP2040 NES
ORIGINAL GITHUB: https://github.com/fhoedemakers/pico-infonesPlus
-
Otaku-Flash Cart for Atari 2600 / 7800 & 2600+
ORIGINAL GITHUB: https://github.com/karrika/Otaku-flash
-
The Ultimate Cart Atari XL / XE
ORIGINAL GITHUB: https://github.com/robinhedwards/UltimateCartThis link contains the original Gerber...
-
PlusCart 2600 Unified SMD PCB
ORIGINAL GITHUB: https://github.com/Al-Nafuur/United-Carts-of-Atari
-
Sega Mega Drive / Genesis joystick to Atari 8-bit
ORIGINAL GITHUB: https://github.com/eyvind/sega-adapter
-
NES Cart CNRom
ORIGINAL GITHUB: https://github.com/emeargt/nes-cnromMemory Supportv02 was designed to support the S...
-
Simple NES Cart (Mapper 0 Nes Cart)
Original GITHUB: https://github.com/doragasu/mojo-nesNES cartridge with no mapper support. Initially...
-
TS2068 Eprom Command Cartridge V2
Original Website: https://gitlab.com/NF6X_Retrocomputing/ts2068cartThis board allows many 28-pin EPR...
-
ATARI 800XL 256KB XE compatible
QuarterMEG Atari 800XL, XE compatible, for Ataris with C021697 (or C021698), schematics Claus Buchho...
-
UNO2SIO V4
BOM:2x 4.7K THT1x 74LS07 THT
-
Fujinet V1.6 for 576nuc
Original Website: https://fujinetwifi.github.io/WIKI GITHUB: https://github.com/FujiNetWIFI/fujinet-...
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
120 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
183 1 1
