MOUSA Mousa - Simple Projects
UNITED STATES OF AMERICA • + Follow
Description
Wireless Power Transmitter With printed Coil on the PCB (Receiver part)
(NOTE: This is the receiver part, the transmitter is here: https://www.pcbway.com/project/shareproject/Wireless_Power_Transmitter_With_printed_Coil_on_the_PCB.html )
This circuit is a low power Wireless Power Transmitter With printed Coil on the PCB using IC 555.
YouTube Video: https://youtu.be/3QEGdm6vfUw
Parts list:
IC 555
Transistor BD139
LED 12(pcs)
Resistor 120 ohm
Resistor 5 ohm
Resistor 18K
Resistor 20K
Capacitor 40pF
Capacitor 680uF
Capacitor 2000uF
Capacitor 100nF(2pcs)
Heatsink for BD 139 transistor
3V Battery
Mar 26,2020
2,190 views
Wireless Power Transmitter With printed Coil on the PCB (Receiver part)
2 Layers PCB 46.3 x 57.4 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
Wireless Power Transmitter With printed Coil on the PCB (Receiver part)
2190
2
0
Published: Mar 26,2020
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by MOUSA Mousa - Simple Projects
-
3 phase Motor and Phase Sequence Indicator / Rotation Tester
This is a DIY Three Phase Sequence Indicator / Rotation Tester Circuit, 3D printed file and parts li...
-
Ultrasonic distance meter without microcontroller
This circuit is an ultrasonic distance meter without using microcontroller.Distance range for this c...
-
Digital Resistance Meter without microcontroller
Digital Resistance Meter without microcontrollerCircuit and parts list: https://mousa-simple-project...
-
Automatic Transfer Switch ATS / Changeover with 3 Input Sources
This circuit is an Automatic Transfer Switch ATS / Changeover with 3 Input Sources (3 ways).It has 3...
-
Full Array Local Dimming TV Backlight
This is a modification to convert an LED LCD TV to Full Array Local Dimming Backlight.Circuit and Pa...
-
Online UPS with Capacitors
This circuit is a short running time online UPS that used high voltage capacitors to stores energy, ...
-
Magnet Polarity detector
This circuit is a Magnet polarity detector using hall effect sensor IC W277.Circuit and Parts list: ...
-
LED Matrix and Lissajous pattern
This circuit is an LED matrix to draw Lissajous pattern/curve .Max frequency less than 10KHz (an edu...
-
DIY Transformerless inverter
This is a DIY Transformerless inverter, it can convert high DC voltage to AC Voltage with Pure sine ...
-
Unusual DIY Vibration Sensor using Analog Voltmeter !!
This circuit is an Unusual way to make Vibration Sensor or Shock Sensor using an Analog Voltmeter !!...
-
Active power factor correction
This project is Active Power Factor Correction Using MC33262 Circuit and parts list : https://mousa-...
-
LED Seven Segment Display Without IC
This circuit is a simple driver for seven segment display without using any IC.It can display 10 num...
-
Solar Inverter Without Battery
This circuit is a 1500W DIY Solar inverter that working without Battery, using solar panels only.Wit...
-
Thermo-Switch Gerber
This circuit is a thermoSwitch using a Thermocouple. It can switch ON/OFF a load when temperature ri...
-
Digital Electronic Tape Measure / Digital Rolling Ruler
This project is an electronic digital tape measure (rolling ruler) without using microcontroller.It ...
-
8-Channel Voltage Multiplexer for Oscilloscope
This electronic circuit is a voltage multiplexer for oscilloscope that helps you to measure 8 differ...
-
DIY Avoidance Sensor Module with better features
DIY Avoidance Sensor Module with better featuresYouTube video: https://youtu.be/hjLncqlu6DQCircuit d...
-
LED Chaser with 80 channels
LED Chaser with 80 channels using IC 4017YouTube video: https://youtu.be/0izldDmaTy0Circuit and part...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
86 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
175 1 1
