double superheterodyne receiver for 10m,6m and air-band
2 Layers PCB 66 x 87 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
5480
3
2
5.81 (8)
Published: Feb 17,2019
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(2)
- Likes(3)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
VOTING
8 votes
- 8 USER VOTES
5.81
- YOUR VOTE 0.00 0.00
-
6design
-
6usability
-
7creativity
-
5content
6.00
-
7design
-
7usability
-
8creativity
-
6content
7.00
-
5design
-
5usability
-
4creativity
-
1content
3.75
-
9design
-
7usability
-
8creativity
-
7content
7.75
-
8design
-
6usability
-
7creativity
-
5content
6.50
-
8design
-
8usability
-
8creativity
-
6content
7.50
-
8design
-
7usability
-
5creativity
-
2content
5.50
-
2design
-
3usability
-
2creativity
-
3content
2.50
More by shuuichi takikawa
-
12au7 mini watter amp : model RK212
Supply 12.6V can drive tube amp like this. Here is headphone amp and 220mW output.
-
12au7 direct conersio receiver on 40m. 12.6v supply
For radio builder, 40m ssb direct conversion receiver. 12.6v supply.two 12au7 on board. need trans,c...
-
headphone amp 12au7 diy : op amp + booster (220mW output) 12.6v supply. Can drive speaker like youtube
Max power 250mW. 12au7+op amp +booster.and led indicator.show to http://takinx.dcnblog.jp/radio_kit_...
-
mic-compressor board for amature radio station
TDA1054 is doing well. One IC can do it and easy to buid.
-
For derement AGC radio, s meter.
radio indicator for TA7642 ic radio.schematic
-
Rf speech processor: kp-12 is rebuilt . one make p.c.b of ham radio speech compressor
Rf speech processor: kp-12 is rebuilt . one make p.c.b of ham radio speech compressorschematic
-
LED meter for homebrue radio .Instead of s meter.
For increment AGC radio, signal strength meter is here.Supply 6v.
-
This straight radio ; ta7642 radio with s meter
This straight radio is havig s-meter.schematic
-
TDA1572 radio.
Using TDA1572 for broad cast radio.Circuit diagrams here : http://takinx.dcnblog.jp/radio_kit_/sub11...
-
RF speech processor for ssber
For AMer and ssber ,rf speech processor.Here is filter-less type rf speech processor. low cost ,easy...
-
ta2003 radio board.
This is easy to build the heterodyne radio .schematic is here.http://takinx.dcnblog.jp/radio_kit_/fi...
-
Wireless-mic using ta7310
For radio builder, mini-tx on middle-wave using ta7310.Small size and easy to make up. design:http:/...
-
50MHz am transceiver :TX input 1W / RX:double super heterodyne
For radio builder, qrp am trx.TX :using SL1641 for am mod amd mic-compress ta2011s on board.RX:doubl...
-
A mini radio,using LA1600 and 6AK5.
A mini radio using LA1600 and 6AK5.One IFT(455khz) and one filter(murata).Tube 6AK5 is doing well as...
-
reflex radio :high sensitivity
For radio builder, easy to make a reflex radio. But high sensitivity like super heterodyne radio....
-
Broad cast radio, 12au7 and tda1072.
Middle wave radio pcb.Using 12AU7 for tone-controller,radio IC is tda1072, and TA7638 as AF IC.
-
one IC radio for middle wave.
For radio builder, AM radio pcb is here. Using ta7613 only.Small size and easy to make up.
-
Tda1083 am/ssb radio : product detector on board. : model RK-63
This is AM/SSB radio board.For radio builder, product detector on board here. It is RK-63,using td...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
