joy2usb - Atari-like joystick adapter to USB
https://github.com/mistepien/joy2usb
Adapter is actually a shield for Arduino Pro Micro based on ATmega 32U4.
ATmega 32U4 has a hardware support for fullspeed USB, thus polling rate 1000Hz is not an issue for that chip.
The adapter has a toggle C64/Amiga for choosing C64 or Amiga approach for FIRE2/FIRE3.
According to wiki.icomp.de website about DE-9 joystick, FIRE2/FIRE3 are pulled to VCC in case of C64 and to GND in case of Amiga. That is not an issue for joy2usb. Since rev. 2.1 there is a LED switched together with PULL-DOWN for C64.
joy2usb - Atari-like joystick adapter to USB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(4)
More by Engineer
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
