The original, thin copper foil present on one or both sides of a copper clad laminate. During PCB manufacture,...
A PCB having all lines, pads and layers intact but without components installed. An unassembled PCB.
Laminate impregnated with a resin and cured to an intermediate stage (B-stage resin ). Normally designated as prepr...
Two or more polar and non-polar solvents that behave when mixed as a single solvent to remove polar and n...
A lead extending out the end and along the axis of a resistor, capacitor or other axial part rather than&...
American Wire Gauge. A method of specifying wire diameter; the higher the number, the smaller the diameter.
Hardware that automatically analyses functional or static parameters to evaluate performance degradation. It also performs fa...
Assembling discrete components to PCBs via electrically controlled equipment.
A manufacturing facility for attaching and soldering components to a printed circuit.
i: A drawing depicting the locations of components, with their reference designators (q.v.), on a printed circuit. ii:T...
Acronym for “American Standard Code for Information Interchange”; a seven-bit code that assigns numeric values to letter...
An accurately scaled configuration used to produce a master pattern. It is generally prepared at an enlarged scale&...
Ranking | Name | Answers |
---|---|---|
1 | PCBWay Team | 6 |
2 | Engineer | 1 |
3 | Stephen Newport | 1 |