1. Blog>
  2. PCB transport mechanism classification

PCB transport mechanism classification

by: Feb 17,2014 1032 Views 0 Comments Posted in Engineering Technical

PCB transport mechanism PCB

( 1 ) monorail (Single Lane)

Monorail -type transport mechanism shown in Figure 1 .

“PCB

Figure 1 Schematic monorail conveyor mechanism

A monorail -type transport mechanism to send a board. When a board in the patch , the next panel is located within the buffer strip width can be automatically adjusted according to the parameters programming board , the board sent both left- to-right format , there are right-to- left panel , mechanical circuit breakers institutions and adapt the standard form separate plate shape.

( 2 ) two-track (Dual Beam)

Track -fed plate mechanism shown in Figure 2 .

“PCB

Figure 2 Schematic track -fed plate agency

Track -type organization to send a transmission plate two plates . Options in the track has six regions , regions A, C, D and F to I / outgoing PCB, B , and E to the patch area . Mounter can put a maximum of three PCB, - like two plates in the region B and E, another board may at any other input / outgoing position. Track -fed plate agency software follows the principle of first in first out , first into the machine 's panel also heard the first machine , track running the same product . When a patch panel , another panel in the buffer region to prepare the track , after the completion of the previous patch panels , each panel immediately begin processing the pre- track area , so that you can minimize the time of the transfer plate .

Join us
Wanna be a dedicated PCBWay writer? We definately look forward to having you with us.
  • Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
    Back to top