● Lead-free compatible FR-4.0
● Excellent thermalreliability
● LowZ-axis CTE
● Good Anti-CAF performance and IST
● Low water absorption
● Computer and NB
● Instruments
● Consumer electronics
● Automotive electronics
● Power supply and industrial
Product Performance
Items | Method | Condition | Unit | Typical Value | |
Tg | IPC-TM-650 2.4.25D | DSC | ℃ | 155 | |
IPC-TM-650 2.4.24.4 | DMA | ℃ | 160 | ||
Td | IPC-TM-650 2.4.24.6 | 5% wt. loss | ℃ | 348 | |
CTE (Z-axis) | IPC-TM-650 2.4.24 | Before Tg | ppm/℃ | 37 | |
After Tg | ppm/℃ | 230 | |||
50-260℃ | % | 2.8 | |||
T260 | IPC-TM-650 2.4.24.1 | TMA | min | 60 | |
T288 | IPC-TM-650 2.4.24.1 | TMA | min | 20 | |
Thermal Stress | IPC-TM-650 2.4.13.1 | 288℃, solder dip | -- | >100S No Delamination | |
Volume Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ.cm | 1.5E + 08 | |
E-24/125 | MΩ.cm | 3.2E + 06 | |||
Surface Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ | 3.5E + 07 | |
E-24/125 | MΩ | 2.3E + 06 | |||
Arc Resistance | IPC-TM-650 2.5.1 | D-48/50+D-4/23 | s | 150 | |
Dielectric Breakdown | IPC-TM-650 2.5.6 | D-48/50+D-4/23 | kV | 45+kV NB | |
Dissipation Constant (Dk) | IPC-TM-650 2.5.5.9 | 1GHz | -- | 4.6 | |
IEC 61189-2-721 | 10GHz | -- | — | ||
Dissipation Factor (Df) | IPC-TM-650 2.5.5.9 | 1GHz | -- | 0.011 | |
IEC 61189-2-721 | 10GHz | -- | — | ||
Peel Strength (1oz HTE copper foil) | IPC-TM-650 2.4.8 | A | N/mm | — | |
After thermal Stress 288℃,10s | N/mm | 1.3 | |||
125℃ | N/mm | — | |||
Flexural Strength | LW | IPC-TM-650 2.4.4 | A | MPa | 530 |
CW | IPC-TM-650 2.4.4 | A | MPa | 440 | |
Water Absorption | IPC-TM-650 2.6.2.1 | E-1/105+D-24/23 | % | 0.09 | |
CTI | IEC60112 | A | Rating | PLC 3 | |
Flammability | UL94 | C-48/23/50 | Rating | V-0 | |
E-24/125 | Rating | V-0 | |||
1. All the typical value is based on the 1.6mm specimen, while the Tg is for specimen≥0.50mm.
2.All the typical values listed above are for your reference only and not intended for specification. Please contact Shengyi Technology Co., Ltd. for detailed information. All rights from this data sheet are reserved by Shengyi Technology Co., Ltd
Explanation: C=Humidity conditioning, D=Immersion conditioning in distilled water, E=Temperature conditioning
The first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.
Product Certificate
CQC S1000H S.pdf
CQC S1000H CN 陕西.pdf
BSI VC 660215（2016）.pdf
S1000H TDS
S1000H Line up
S1000H Processing guidelines
S1000H Laminate SGS
S1000H Prepreg SGS
S1000H Laminate MSDS
S1000H Prepreg MSDS
