Product Description

Arduino Pro Mini 328 - 5V/16MHz

This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.


We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin and not VCC.


The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.


Features:

  • ATmega328 running at 16MHz with external resonator (0.5% tolerance)
  • 0.8mm Thin PCB
  • USB connection off board
  • Supports auto-reset
  • 5V regulator
  • Max 150mA output
  • Over current protected
  • Weighs less than 2 grams!
  • DC input 5V up to 12V
  • On board Power and Status LEDs
  • Analog Pins: 8
  • Digital I/Os: 14
  • 0.7x1.3" (18x33mm)


  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    • ATMEGA328P Microcontroller Development Board, Arduino-Compatible
      $13.00 or 1300 Beans
      Redeem Now
    • R7FA4 PLUS A Development Board, Based on R7FA4M1AB3CFM, Compatible with Arduino UNO R4 Minima
      $15.00 or 1500 Beans
      Redeem Now
    • R7FA4 PLUS B Development Board, Based on R7FA4M1AB3CFM ,Equipped with ESP32-S3FN8, Compatible with Arduino UNO R4 WiFi
      $23.00 or 2300 Beans
      Redeem Now
    • ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32
      $10.00 or 1000 Beans
      Redeem Now
    • ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32
      $9.00 or 900 Beans
      Redeem Now
    • Nano V3.0 Adapter Expansion Board
      $1.00 or 100 Beans
      Redeem Now
    • Arduino UNO R4 WiFi
      3000 Beans
      Redeem Now
    • Universal e-Paper Raw Panel Driver Shield for Arduino / NUCLEO
      $13.00 or 1300 Beans
      Redeem Now
    • -18%
      RS485 CAN Shield
      $9.00 or 900 Beans
      Redeem Now
    • IO Sensor Shield V2(Suitable for Arduino)
      $10.00 or 1000 Beans
      Redeem Now
    • -49%
      Arduino Nano V3.0 ATMEGA328P
      300 Beans
      Redeem Now
    • PH2.0 Extended Power Module(female pin)
      $1.00 or 100 Beans
      Redeem Now
    • PH2.0 Extended Power Module(male pin)
      $1.00 or 100 Beans
      Redeem Now
    • -50%
      New Ethernet W5100 Network Expansion Board Module with SD Card Expansion, Compatible with UNO R3
      $6.00 or 600 Beans
      Redeem Now
    • -50%
      Two-axis Key Rocker Sensor, compatible with Arduino
      $1.00 or 100 Beans
      Redeem Now
    • Arduino 125k RFID Card Reader Module rdm6300 ID RF Module UART Output
      $5.00 or 500 Beans
      Redeem Now
    • -57%
      STM32F103C8T6 ARM STM32 Arduino Minimum System Development Board Row
      $3.00 or 300 Beans
      Redeem Now
    • ProtoShield Prototype Expansion Board with Mini Breadboard for Arduino UNO
      $2.00 or 200 Beans
      Redeem Now
    • Micro SD Card Module Slot Socket Reader
      $1.00 or 100 Beans
      Redeem Now
    • Digispark Kickstarter Micro-USB Development Board for Arduino Attiny85
      $3.50 or 350 Beans
      Redeem Now
    Product Name
    Link for reference
    Quantity