Two-axis Key Rocker Sensor, compatible with Arduino
Product introduction:
The PS2 biaxial button rocker module adopts the original high-quality metal button rocker potentiometer on the PS2 gamepad. The module is specially equipped with two analog output interfaces and one digital output interface. The output values correspond to (X, Y) biaxial offset respectively, and the type is analog. The key indicates whether the user presses on the Z axis, and its type is digital switch value. The module is integrated with a power indicator, which can display the working status. Clear, concise and accurate positioning of coordinate identifiers; It can easily control the movement of objects (such as two-degree-of-freedom steering gear pan/tilt) in two-dimensional space, so it can be programmed by Arduino controller and plugged by sensor expansion board to complete creative remote control interactive works.
Product Details：
1. Input voltage range: DC 3.3V to 5V
2. Output signal: The module is specially equipped with two analog output interfaces and one digital output interface, and the output values correspond to (X, Y) biaxial offset respectively, which is analog; The key table shows whether the user presses on the Z axis, and its type is digital switch value.
3. You can use Arduino. Controller programming, sensor expansion board plug-in, complete creative remote control interactive works.
4. The cross rocker is a bidirectional 10K resistor, and the resistance value of the tap changes with the direction of the rocker. The module is powered by 5V. in the original state, the reading voltage of x and ya is about 2.5V when pressed in the direction of arrow, the reading voltage increases and reaches 5v. When the arrow is pressed in the opposite direction, the read-out voltage value decreases, and the limit is 0V.
- Comments(0)
You might like
-
-
R7FA4 PLUS A Development Board, Based on R7FA4M1AB3CFM, Compatible with Arduino UNO R4 Minima$15.00 or 1500 BeansRedeem Now -
R7FA4 PLUS B Development Board, Based on R7FA4M1AB3CFM ,Equipped with ESP32-S3FN8, Compatible with Arduino UNO R4 WiFi$23.00 or 2300 BeansRedeem Now -
ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32$10.00 or 1000 BeansRedeem Now -
ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32$9.00 or 900 BeansRedeem Now -
-
-
-
-
-
-
-50%
New Ethernet W5100 Network Expansion Board Module with SD Card Expansion, Compatible with UNO R3$6.00 or 600 BeansRedeem Now -
-
-57%
-
ProtoShield Prototype Expansion Board with Mini Breadboard for Arduino UNO$2.00 or 200 BeansRedeem Now -
-
Digispark Kickstarter Micro-USB Development Board for Arduino Attiny85$3.50 or 350 BeansRedeem Now
Two-axis Key Rocker Sensor, compatible with Arduino
-50%In Stock
