Product Description
Micro SD Card Module Slot Socket Reader
Specification:
This high quality low cost micro SD Card module can make your SD application easier and simpler. It is easily interfaced as a peripheral to your Arduino sensor shield module and through programming, you can read and write to the SD card using your Arduino. Can be used for SD Card more easily, such as for MP3 Player, MCU/ARM system control.
Supports Micro SD Card, Micro SDHC card (high-speed card)
Communication interface is a standard SPI interface
Control Interface: 6 pins (GND, VCC, MISO, MOSI, SCK, CS),
Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Fixing:4 x M2 screws
Size:45mm x 28mm
- Comments(4)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
R7FA4 PLUS A Development Board, Based on R7FA4M1AB3CFM, Compatible with Arduino UNO R4 Minima$15.00 or 1500 BeansRedeem Now
-
R7FA4 PLUS B Development Board, Based on R7FA4M1AB3CFM ,Equipped with ESP32-S3FN8, Compatible with Arduino UNO R4 WiFi$23.00 or 2300 BeansRedeem Now
-
ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32$10.00 or 1000 BeansRedeem Now
-
ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32$9.00 or 900 BeansRedeem Now
-
-
-
-
-
-
-
-50%New Ethernet W5100 Network Expansion Board Module with SD Card Expansion, Compatible with UNO R3$6.00 or 600 BeansRedeem Now
-
-
-57%
-
ProtoShield Prototype Expansion Board with Mini Breadboard for Arduino UNO$2.00 or 200 BeansRedeem Now
-
-
Digispark Kickstarter Micro-USB Development Board for Arduino Attiny85$3.50 or 350 BeansRedeem Now