Tim Jackson's Profile - Engineer - PCBWay Community

Tim Jackson

Retired due to health.

Recommended

This is a little solar DC Motor Driver.It uses two LDR (Light Dependant Resistor) sensors to track the movement of the sun.There is no microcontroller, it uses an Op-Amp (Operational Amplifier) as a c...
Tim's Solar Motor Driver
26700
Tim's DFPlayer Plus BoxThis is a box I designed to hold Tim's DFPlayer Plus that I have shared here: Tim's DFPlayer PlusThis box is designed to hold the PCB and the Battery mod I have done on my Instr...
Tim's DFPlayer Plus Box
15500
This project was inspired by one of my favourite YouTube channels.I mention them in my first video for this project where I was prototyping the project Tim's DFPlayer Plus [Talking about it]The video ...
Tim's DFPlayer Plus
20600
This is Version 2 of my previous Tim's I2C Dual Motor Driver.This supersedes this Project. Tim's I2C Dual Motor Driver - Share Project - PCBWayWhat has changed?On my previous version of my motor drive...
Tim's I2C Dual Motor Driver [Version 2]
18201
This is a PCBWay PCB Version of mini plotter I did quit a while ago, my original mini plotter I made of standard modules I bought and a home made PCB.Details of the original can be found at my Blog he...
Tim's Mini Plotter 2
125005
This board has been SupersededThe version 2 can be found here:Tim's I2C Dual Motor Driver [Version 2] - Share Project - PCBWayAboutThe board can control two motors with quadratic encoders and a stati...
Tim's I2C Dual Motor Driver
44203
Tim's Pie DividerWhen that pie comes out of the oven and your tummy rumbles, who gets the largest piece?It's easy to cut a pie into two, four or eight.But what happens when there is an odd number of p...
Tim's Pie Divider
48101
I am working on a project that needs about six Motors. There are many DC Motor Drivers available, But.The Motors I am using are DC Motors with Quadrature Encoders.Quadrature Encoders have an A and B o...
Tim's I2C Intelligent DC Motor Driver
79601
This is a fused version of this: Tim's PTC Hot Plate ControllerInstructable at: Tim's Hot PlateFor components and information please refer to the above links, the only thing added is a fuse. I have us...
Tim's PTC Hot Plate Controller [Fused version]
94003
This is a for a DIY Hot Plate, for soldering SMD to PCBs.The heater element that it controls are the 300W PTC type, the small cheap aluminium ones sold on the internet.I have done a full Instructable ...
Tim's PTC Hot Plate Controller
198904
This is a module to give my robot TIM-01 Eyes.With many projects controlled by an Arduino or similar microcontroller, the number of pins soon become in short supply.So when it came to designing some e...
TIM-01 EYES
160301
This board was designed to drive the motors controlling the arms on my robot TIM-01.I have a blog on the progress of my robot here:Robot-TIM-01It's six basic Half-Bridges, with a few extra transistors...
Tim's DC Motor Driver X6 Mk2
114701

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on