lowlevel 76's Profile - Engineer - PCBWay Community

lowlevel 76

Recommended

This is a basic RF modulator style composite video board for the Tandy / Radio Shack Colour Computer 2The channel 3/4 switch acts as a Colour / Mono switch, or you can use a jumper or other switch ins...
CompyCoco2
39753
I needed a hard to find RTC72421 chip for my Amiga 2000 and opted to install a surface mount type in place of the DIP type. This was made in KiCad and has been built and tested to operate as expected....
Is72423Now
76002
This sits between an ASCII keyboard and the Apple II to 'change' the ASCII values to whatever values you want.I originally built this to fix a specific keyboard with a damaged controller, but I feel I...
ASCIITRAN Apple II Keyboard Translator
250006
Encountered a rather poorly done composite mod in an Atari 2600 (NTSC) and decided the best way to clean it up was with a custom PCB!Original RF Modulator can is completely removed and the right angle...
Compy 2600 - Atari 2600 Composite Mod (NTSC)
5743022
The standard TI-99/4A Joysticks are pretty awful. I made this to let me plug my favorite Atari standard joystick in to play some TI Invaders.They had designed their system in such a way that two joyst...
TI-99/4A Atari Joystick Adapter
280115
Now you can use those old apple II paddles on the IIc! Or if you have a IIe, you don't have to open the lid and try to insert the DIP-16 plug without damaging it any more.
Apple IIc / IIe Paddle Joy
200905

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on