Agnieszka Bartkowicz's Profile - Engineer - PCBWay Community

Agnieszka Bartkowicz

14+ years as an electronics design engineer, doing high-speed digital designs most of the time

Recommended

This is full version of Tank-Mouse USB to DB9 adapter. It has several modes of operation and can be used with both USB Gamepad (as a Joystick) or MouseIf used with USB mouse:it has:Amiga mode (default...
USB gamepad or mouse for classic computers
56802
THIS IS A PROTOTYPE! DO NOT ORDER IF YOU DON'T WANT TO PARTICIPATE IN BETA TESTINGNO WARRANTY OF ANYTHING AT THIS MOMENT OF DEVELOPMENT PHASE
VBXE 3 board for 8bit Atari Computers
66506
Required board thickness is 1mm or close to it!+ up to 4 Pokey chips+ up to 2 SID chips+ up to 2 AY/Yamaha PSG chips+ up to 32 channel wavetable with 8Mbytes of sample RAM+ 32/16 channel custom FM syn...
SimpleStereo v4
98318
Side 3.3 is new revision of Side3 project, if you already have 3.1 or 3.2 you should not bother upgrading hardware to 3.3 as this is just to rty some ideas out and not bringing anything new to your ex...
SIDE3.3 Cartridge
1186311
This is my take on TZX Duino in custom case and with digital volume control, li-po battery and bulit-in charger keeping it as much cable-free as one canFormware GitHub:https://github.com/gyorka/TZX_Du...
Custom HW for TZX Duino
45803
this adapter allows connecting modern USB keyboard to your 8bit Atari computer, handling USB keyboards, joysticks if wired for it or USB memory stick providing SIO2USB interfaceCurrent software suppor...
USB keyboard interface for POKEY chip
49102
Commodore Plus4 CPU replacement - for all of you having a bad one and not wanting to butcher C64 for thisIt uses NMOS version of 6502 thus it is able to execute all illegal op-codes as original MOS750...
6502 to 8501 adapter
57115
this is Atari Lynx II screen replacementIt outputs directly to modern LCD screen using so-called TTL interface and VGA capable displayIt also has USB interface so you could use modern gamepads with yo...
Atari Lynx II LCD replacement
36501
C061922 Freddy chip replacement
C061922 Freddy chip replacement
53601
IBM PC XT/AT compatible network adapter. Designed for and used with Xi8088 by Sergey Kislew (https://github.com/skiselev/xi_8088), but it should work in any 8088 based system with 8bit ISA slot
8088 8bit ISA network adapter
34003
This is never released Side3.x wing board that extends its functionality if used on stock - non U1MB equipped Atari computer.It adds extended ram support and pbi bios for full ATR file support without...
SIDE3.x wing board
43713
Incognito-Lite is a RAM module replacement board that adds Atari XL/XE compatibility mode to good old Atari 400 computer, providing up to 1MB of additional extended memory, 64k of base memory, USB fla...
Atari 400 Incognito-Lite
88658

1 2

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on