Christopher Belcher's Profile - Engineer - PCBWay Community

Christopher Belcher

Recommended

This is a dual purpose adapter for 5200 owners. It will let you use a PC joystick with your 5200 and provide the missing keypad keys. The 0.22uF capacitors let the PC potentiometers work with the 5200...
Atari 5200 - PC Joystick or Wico 5200 Adapter
11501
This is a clone of the 32K Super Memory Expander for the VTech Precomputer 2000 / Genius Leader 2000.It gives you battery backed up SRAM to use to save and load files with the built-in BASIC...
32K Super Memory Expander for the VTech Precomputer 2000 / Genius Leader 2000
6820
I sometimes remove chips from retro computers and want to put in ZIF sockets for testing, but the pins are much wider on a ZIF. This lets me adapt them using headers and the ZIF.
40 pin wide DIP to ZIF
53403
I sometimes remove chips from retro computers and want to put in ZIF sockets for testing, but the pins are much wider on a ZIF. This lets me adapt them using headers and the ZIF.
28 pin wide DIP to ZIF
46001
This is the SIO port loopback cartridge to be used with the Atari 65/130XE Production Test cartridge.More information can be found:http://blog.3b2.sk/igi/post/Atari-cartridge-11-Special-cartridge-Test...
Atari 65/130XE Production Test Jig - SIO Loop
110903
This is the joystick port loopback cartridge to be used with the Atari 65/130XE Production Test cartridge.More information can be found:http://blog.3b2.sk/igi/post/Atari-cartridge-11-Special-cartridge...
Atari 65/130XE Production Test Jig - Joystick Loop
112704
Will allow you to plug a wired Genesis controller into an Atari 7800 and have 2 button functionality
Genesis Controller to Atari 7800
132404
Atari 5200 consoles with controller problems sometimes need their POKEY adjusted to center the controller. There are several discussions on AtariAge such as: https://atariage.com/forums/topic/30021...
Atari 5200 Controller Test Fixture
176306
Lets you mount an Alco DR series 16 position rotary switch on a panel - useful for multiROM and multicart projects for retrocomputers. You can use a DR series switch along wtih a resistor network...
DR Rotary Switch Panel
84201
XE 1M Cart Instructions (Rev A)by Bryan EdewaardThis board is designed to fit into the new Mq/Sikor shell and provide up to 1MB of ROM space via bank-switching. It can also be configured for a non ban...
Atari XE 1MB XE SuperCart
279437
Replaces the 2364 BASIC ROM in Atari XL computers with a 27C1000 to allow you a selection of 16 different 8k ROMs built in.You must use 16 8k binary images - you can concatenate them in a hex edi...
Atari Basic ROM multi-adapter
182207
A board that uses and Arduino Nano to go from 5pin DIN MIDI to the Atari 2600 Joystick port.To be used with the Syndrum Software by John Sutley.see:https://hackaday.io/project/161467-syndrum-an-atari-...
Syndrum MIDI to Atari Carrier
94503

1 2

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on