2answers

[PCB Prototype] WEIGHT SCALE BASED ON ESP32

I am looking to design a weight cell PCB with Bluetooth using the ESP32 and HX711 connected to 50KG load cells.
10answers

[PCB Prototype] How would I desolder these switches?

This remote control, used to control my blinds, and I wanted to replace the buttons (switches?) on it with a relay board controller, so that I could use the remote from a raspberry pi instead of havin...
1answers

[PCB Prototype] do you have a gerber file viewer that I can use to check my files before placing the orser?

Do you have a Gerber file viewer that I can use to check my files before placing the order?
1answers

[PCB Prototype] Availability

Solar Powered WiFi Weather Station V2.0 Wondering when it will be back in stock
1answers

[PCB Prototype] Sw6106 power bank

Can you help me to understand why my pcb works only with usbc connected If leave only the battery it not works ... no 5v as out This is the schema https://pasteboard.co/JChc1yR.png
4answers

[PCB Prototype] Difference between Via filled with resin and Via filled with copper

What is the difference between Via filled with resin and Via filled with copper?Why I can't select via filled with copper on the website for my PCB?
1answers

[PCB Prototype] board design

I attempted to orderESP32 TFT Combiner V1 - Share Project - PCBWayBut received a board in attached photo, Not sure how this happened, just emailed pcbway now. What was this board used for?
5answers

[PCB Prototype] Otto Pcb Share bom List ?

Hi. Please share bom list for this Otto pcb ? And schematic ? The names of some components are not written on the pcb.
1answers

[PCB Prototype] that is, it is ready for use;

ESP8266 native Apple HomeKit Paradox Alarm System -/><a href="https://www.pcbway.com/project/shareproject/ESP8266_native_Apple_HomeKit_Paradox_Alarm_System.html"><img src="h...
1answers

[PCB Prototype] T-Clad (Thermal Clad) versus FR-4 COST

What is the cost difference between Thermal Clad aluminum (LED circuit board type) substrate compared to FR-4 board per square inch. For a 1 layer board. 1.65 mm thickness. Both mate...
1 ... 49 50 51 52 53 54 55 56 57 58 59 ...
Ranking Name Answers
1 PCBWay Team 10
2 Marcell Feher 2
3 Engineer 1
4 Brandon Weatherly 1
5 Rayan Bayan 1