The STM32 Shift Clock is a simple development board built around the STM32F103C8 MCU and it is intended to function as a desktop clock. This project gave me the opportunity to try PCBWay's SMT part so...
i misunderstood, how many assembled i was paying for. wish it had been all 20, but the 5 assembled cards are perfect. the components i received, i have to sort thru which are which, but i'm happy rega...
After trying my hand at surface mount soldering for this project I decided to use PCBWay's PCB Assembly service. I've attached one photo of my soldering and one of PCBWay's - I think it's easy to tell...
This is our first ESP32-S3 application. It includes CAN (J1939), two A/D channels (voltage input), multiple DAQ inputs tied to 10K Type 2 temp sensors, one on-board temp sensor, one I2C dP sensor tied...
I designed these small but dense PCBs to replace VCO ICs in vintage synthesizers. It contains 0201 passive components and QFN components with 0.4 mm pitch. Minimum trace width and spacing was 6 mil. I...
Assembly: The boards were well assembled with good quality - though there seems to be a short on all the assembled boards which shorts the VBAT to GND and prevents the system from running off of batte...
I waited a month to write this review so that I could spend some time testing the boards. They work, and any minor issues are my fault since this was the first circuit board I've ever made with surfac...
My project is a general purpose/lab +15(-15V) power module break-out board with additional decoupling and +V -V LED status for current and future pro-audio testing and prototyping. My experience using...
The PCB was assembled well. The hall effect sensors were the right direction. The standoff height was what I wanted, which was 0 standoff height, however I did not specify the standoff height. Maybe f...
I want you say thank you for the excelent job. Everything works good agree with te results. It is was excelent experience. All the components fixed accoridng with the gerber files. Next project is goi...
Quantity 5 fairly simple 2 layer PCBAs, largely surface mount. Designed to take an ESP32 Pico Dev Kit attachment and used for test fixturing. PCBWay did a great job on these boards. During the proc...
The assemblers always do a great job and this time, the PCB Assemblies were packaged so professionally, I need to share pics!!
This is a crowbar circuit kit for ham radio and electronic hobbies. The assembly includes all of the SMT parts pre-populated. Thru hole parts are installed by the customer. The quality of the assem...
I designed this board in KiCad as part of a larger open hardware project (https://github.com/rrainey/tempo). I've used PCBWay for many PCB projects but this was my first experience using their PCB A...
Good quality work. This is our second build
Every part of the order was done cleanly and professionally, was incredibly happy with the result. Customer service was especially prompt, courteous, and helpful.
1 2 3 4 5 6 7 8 9 10 11 ...