This project is designed to build an 8cell 12v LiFePO4 battery for car audio. Capable of producing 800A continous Power and Bursts of 1200A for 10 seconds while remaining above 12v, this PCB serves as the main busbar as well as the balance leads for full BMS or balancer installation. 5mm thick Aluminum busbar layers are required for full power output along with this PCB

This parts are required to finish this project.

Pair Aluminum D shaped plates - https://j35.us/Alum-LEV60-busbars

3x Aluminum Long Shaped plate - https://j35.us/Alum-LEV60-busbars

This board makes it easy to connect a BMS using these green connector.

5pin PCB screw terminal connector https://amzn.to/3qhUFdf

16x M6x1.25 Nuts https://www.mcmaster.com/90710A120/

8x LEV60F cells - https://j35.us/LEV60-LiFePO4

1/0 Awg Terminal Blocks https://s.click.aliexpress.com/e/_Dmi7gxL

BattGo Balancer https://j35.us/BattGo-BG-8S

BattGo Balance Cable https://s.click.aliexpress.com/e/_DEa4ojF

Optional- 1cell compression plates - https://j35.us/1cell-Compression