This project is designed to build a 10cell 16v LiFePO4 battery for high performance Car Audio use. Capable of producing 400A continuos

and Bursts of 1200A for 10 seconds this PCB serves as the main busbar as well as the balance leads for full BMS or balancer installation. 3mm thick Aluminum busbar layers are required for full power output along with this PCB

Additional items needed to complete project

4x Long Aluminum plates - https://j35.us/Alum-LEV60-busbars

2x Aluminum D|Plates - https://j35.us/Alum-LEV60-busbars

This board makes it easy to connect a BMS using the green connector.

10pin PCB screw terminal connector https://amzn.to/3qhUFdf

20x M6x1.25 Nuts https://www.mcmaster.com/90710A120/

10x LEV60F cells - https://j35.us/LEV60-LiFePO4

Recommended BMS - https://amzn.to/47tqzn1

1x BattGo Balancer https://j35.us/BattGo-BG-8S

BattGo Balance Cable https://s.click.aliexpress.com/e/_DEa4ojF

Optional- 2cell compression plates - https://j35.us/2cell-compression