|
KiCADKicad
|
200W solid-state amplifier
This is a complete project with which you can install a sound box for family parties, it has everything you need to have a professional sound.
stereo output
I made it with a stereo output so I could install two types of speakers and be able to adjust the frequency to each person's taste.
It is preferable to place speakers with a minimum impedance of 4 Ohm.
Power input
The power supply must be symmetrical like most amplifiers of this type, the voltage ranges from +/-30 Vdc to +/-50 Vdc.
Additionally, a symmetrical +/-12 Vdc input is needed, this is necessary to power the crossover operating amplifiers.
If you want to know more about this project you can visit: https://maykolrey.com/descargas/amplificador-200w-tonos
200W solid-state amplifier
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(4)
Log in to post comments.
Reply
Reply
Reply
- 3 USER VOTES
- YOUR VOTE 0.00 0.00
-
8design
-
7usability
-
8creativity
-
5content
-
8design
-
7usability
-
9creativity
-
6content
-
10design
-
10usability
-
10creativity
-
10content
More by Maykol Rey
-
-
Modifying a Hotplate to a Reflow Solder Station
520 0 4 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
301 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
759 4 2 -
How to measure weight with Load Cell and HX711
551 0 3 -
