|
|
MOLEX 26604100 |
x 2 | |
|
|
CONN JUMPER SHORTING .100 |
x 4 | |
|
|
CONN HEADER VERT 36POS 2.54MM |
x 1 |
6/7 digit Pinball display for early Bally games
Pinball machines in the 80s used high voltage seven segment displays to show the scores for each player. After 40 years of use these displays are often broken and original replacements are hard to get. My display provides a plugin replacement for these old displays. It comes 99% preassembled, only a few header pins need to be soldered manually.
It fits for allmost all 'Bally' pinball machines produced between 1977 and 1985.
Features:
- LED, no high voltage
- can be dimmed
- dot enable/disable
- 6digit and 7digit version available
- 7 digit displays can be used in 6digit games (together with 7digit bootleg rom)
In most cases for a 'standard' Bally ( 4 Players) you will need four 7digit and one 6digit display.
More information on https://lisy.dev/bally-7digit.html
6/7 digit Pinball display for early Bally games
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
More by Ralf Thelen
-
Testdisplay for Williams SYS3..SYS11 and Data East pinball machines
For testing pinball MPUs 'on the bench' you want to have display output. This PCB provids all displa...
-
6/7 digit Pinball display for early Bally games
Pinball machines in the 80s used high voltage seven segment displays to show the scores for each pla...
-
-
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
57 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
273 4 1 -
How to measure weight with Load Cell and HX711
376 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
510 0 0
