|
|
1x15 Female Header |
x 2 | |
|
|
1x15 Male Header |
x 2 | |
|
|
1x2 Male Header |
x 1 | |
|
|
DC Jack |
x 1 | |
|
|
6x6 Button |
x 2 | |
|
|
1k 805 Resistor |
x 1 | |
|
|
10k 805 Resistor |
x 1 | |
|
|
4.7k 805 Resistor |
x 1 | |
|
|
CR2032 Battery Holder |
x 2 | |
|
|
BC817 Transitor NPN |
x 1 | |
|
|
Thyristor |
x 1 | |
|
|
Arduino Nano |
x 1 |
Arduino On Off Button and Coin Cell Power Supply
Hello Everyone!
We will make Arduino On Off Button and Coin Cell Power Supply for Arduino in this Project.
Schematic
How is works On Off Button?
As you can see we have 2 button in this project. On button is connected to thyristor gate pin. If get voltage to the Thyristor gate pin, Thyristor will transmit the energy to the arduino. Stop to transmitting we need to stop the current of the Arduino Connection. For to do this, we are using bc817 transistor. If press the stop button, the current to the base pin of the transistor will stop and transistor cut off thyristor transaction.
CR2032 Battery Power Supply
We have us 2x CR2032 battery holder in our pcb. 2x battery gives us 6 volt. And this voltage is enough to run arduino. Current of these batteries can run arduino for long times.
Circle Electronic
You can watch our YouTube videos about this project. You can learn everything from that video and you can order pcb. We have showed, how we designed this pcb also.
?
Visit our website and see our products.
Arduino On Off Button and Coin Cell Power Supply
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by Circle Electronic
-
TEKTRONIX THS710,THS720,THS730 External Battery Charger with 3D Printed Case
32 1 0 -
-
Atomic Force Microscope - electronic part
103 0 0
