C64 Test Cartridge V1
Hello,
I developed a test cartridge pcb for my next project. So if you need the same you can use it.
The pitch pattern has a grid of 2,54mm.
The 40pin connector is for measurement or for connecting to a second pcb in the next of the C64.
May its easier to test your circuit there. Also you have 2 GND Lines and a VCC Line in the edge.
I marked all the signals on the boards for better working.
It would be nice if you donate it, if you order it. I think i will order more pcbs form this page ;)
Have fun with it and an nice day
Best regards,
Roland
C64 Test Cartridge V1
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(9)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
7design
-
7usability
-
9creativity
-
8content
More by Gonzales555
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
110 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
181 1 1
