Platima Tinkers
AUSTRALIA • + Follow
Components
|
|
ESP32-C3-MINI-1-N4Espressif
|
x 1 |
Tools, APP Software Used etc.
|
|
EasyEDA |
Description
ESP32-CX Riser Board V1.1
ESP32-CX Riser Board - V1.1
See the original here: https://www.pcbway.com/project/shareproject/ESP32_CX_Riser_Board_af417bc6.html
Changes:
- Optional 3V3 LED on one pull-down pin as 'power' LED
- Optional reset & boot (flash) buttons via exposed pads
- Optional 3V3 regulator in case of 5V pin or USB input
- Thinner board, 1mm
- Larger text for pins and pads as the previous was unreadable
- 2.54mm spacing on the pins for compatibility
- Move the pin keying in a bit further to improve strength
I welcome any and all input on this project and have uploaded a video to my YouTube page (https://youtube.com/@PlatimaTinkers) about the failed v1 prototype.
Thanks for reading! <3
Code
Repo
https://github.com/platima/ESP32-CX-Riser
Hackster
https://www.hackster.io/platimatinkers/esp32-cx-riser-board-c0f530
Nov 25,2023
740 views
ESP32-CX Riser Board V1.1
A simple board that can be used in IoT or similar automation projects, designed to work with ESP32-C2, C3 and C6 modules for easy debugging.
740
0
0
Published: Nov 25,2023
Download Gerber file 3
BOM(Bill of materials)
Centroid file
PCBWay Donate 10% cost To Author
File Last Updated: 2023/12/06 (GMT+8)
File update record
2023-12-0610:12:29
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Platima Tinkers
-
ESP32-CX Riser Board V1.1
ESP32-CX Riser Board - V1.1See the original here: https://www.pcbway.com/project/shareproject/ESP32_...
-
ESP32-CX Riser Board
I have a LOT of ESP32 chips, and I use them in many projects, but unfortunately the modules are neve...
-
Pretty, affordable and nice Duo and Pico Ethernet Board
I didn't like that these basic little boards available online were overly expensive, and very ugly, ...
-
8x8 WS2812B RGB LED Board w Mounts & MCU/SOC Positions
Pretty much self explanatory I think!USB-C is only for chaining DIN/DOUT and power. The YouTube vide...
You may also like
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
112 0 0 -
DIY Laser Power Meter with Arduino
162 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
156 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
559 0 2
