GAL programmer
Thsi is hardware to program GAL's. It has variable programming voltage setting. Better protection against high voltages reaching parallel port (which could damge motherboard). Needs a 24 V power adapter.
On LInux it _can_ _also_ work, it does for me, with certain USB<->IEE1284 convertors. (Should be Lucent USS720 compatible.) The companion CSGSOCK2 adapter provide sockets for 20pin resp. 24 pin ZIF sockets.
Very easy to design you own adapter.
The perlblast_nh (Perl) software can directly control everything on this board. More details will be on the gitnub archive.
GAL programmer
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
Log in to post comments.
More by Kees Schoenmakers
-
How to measure weight with Load Cell and HX711
219 0 2 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
389 0 0 -
RGB LED Matrix input module for the Framework Laptop 16
647 0 2 -
-
