HIDman - USB to Retro PC Adapter
HIDman is an open source device to allow the use of modern USB keyboards and mice on legacy PCs.
Peripherals that support legacy PCs are becoming hard to find, especially for the very first PCs. This project aims to provide a simple cheap solution that will cover everything from the original IBM 5150 PC all the way up to modern computers that have PS/2 ports.
You will also need to order the Front enclosure plate : https://www.pcbway.com/project/shareproject/Front_enclosure_plate_for_HIDman_0aec2ae9.html
And the Rear enclosure plate : https://www.pcbway.com/project/shareproject/Rear_Enclosure_for_HIDman_c0ff0b8a.html
Grab the rest of the case from here : https://lincolnbinns.com/e-case-a-black-40mm.html
Don't forget 8x screws : https://lincolnbinns.com/e-case-screws.html (I suggest the thread former ones)
You can find ps/2 cables, serial cables, etc from ebay or aliexpress.
More info/usage guide here : https://github.com/rasteri/HIDman
Or the video version here : https://www.youtube.com/watch?v=44tg6oXGmYI
HIDman - USB to Retro PC Adapter
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by rasteri
-
TAStm32 - TAS Replay Device
Tool Assisted Speedrun replay device. See https://github.com/Ownasaurus/TAStm32
-
Front enclosure plate for HIDman
Front enclosure plate for HIDman
-
Rear Enclosure for HIDman
Rear Enclosure for HIDman
-
HIDman - USB to Retro PC Adapter
HIDman is an open source device to allow the use of modern USB keyboards and mice on legacy PCs.Peri...
-
TAStm32 Enclosure
Enclosure for the TAStm32 replay device. PCB available here - https://www.pcbway.com/project/sharepr...
-
weeCee - Tiny DOS Gaming PC
The weeCee is perhaps the smallest MSDOS gaming PC ever made that doesn't use emulation.It is based ...
-
PC/104 Soundcard
It's based on the Crystal/Cirrus CS4237B, like the Orpheus. It has a waveblaster port (which I've pa...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-
