IMSAIGUY
UNITED STATES OF AMERICA • + Follow
Edit Project
Description
MGA-82563 6GHz Amplifier
YouTube video will follow
Designed for 50ohm impedance, 0.8mm thickness board required
Board tested to 3.2GHz (limited by the test equipment I have) and gave 11dB gain.
Jun 27,2024
46 views
MGA-82563 6GHz Amplifier
100MHz to 6GHz 13dB amplifier
46
0
0
Published: Jun 27,2024
Download Gerber file 4
BOM(Bill of materials)
Centroid file
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/06/27 (GMT+8)
File update record
2024-06-2713:44:01
Gerber file is updated.
2024-06-2709:42:27
Centroid file is updated.
2024-06-2709:42:27
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by IMSAIGUY
-
Op-amp Test Board This is a two section board. two dual op-amps can be compared. Half of the device is used in a non-i...
-
MGA-82563 6GHz Amplifier YouTube video will followDesigned for 50ohm impedance, 0.8mm thickness board requiredBoard tested to...
-
SiTime Clock Oscillators I made these boards 0.8mm thick. Do not load R5 and R6.
-
LM399 10.000V Voltage Standard Here are the youtube videos
-
Lorenz Attractor From Paul Horowitz, the Lorenz attractor for oscilloscope XY display. YouTube video will follow late...
-
Zener Diode Tester Jumper settings for 5, 10, 15, and 20mA currents
-
Dual and Quad OpAmp SImple Tester here is a video explaining the board
-
NE5532 Headphone Amplifier Popular op-amps are NE5532 JRC5532 NJM5532 you might consider JRC4556 for higher currents
-
Linear Optocoupler note: pin one of the IC's are square pads, load correctly as they point different directions.
-
I2C 6 Digit Nixie Tube Display Here is YouTube video, note this is part 5 of a series. You might want to watch all five.
-
Gyrator Board circuits from: https://sound-au.com/articles/gyrator-filters.htm
-
Transistor Training PC Board youtube video will follow soonPlease don't ask for a BOM or schematic. The board IS the schematic. I...
-
LCR Meter PCB Fixture Made for an LCR meter with kelvin 4 BNC fixtures. this is standard spacing of 22mm between connector...
-
8 LED SIP for Protoboard you can build it common cathode or common anode (put the LEDs in backwards)made for 0805 partsconnec...
-
2.4GHz Hairpin Bandpass Filter Designed with Keysight Genesys. If you order this board it must be fabricated with Rodgers 4003C 0.3...
-
2.45GHz YAGI Antenna Design This YAGI design is for 2.45GHz. if you order request: 1mm thick board, no solder mask, black silk s...
-
Protoboard Power Connector this connects the power rails together, top and bottom, on a proto boardor just use extra wire for t...
-
Analog Prototype board from old HP days Odd board for analog circuits. This is modeled after a board available in the HP stockroom when I wo...
You may also like
-
TrackSenger - Standalone - Armachat - Meshtastic WiFi-LoRa-BT-GPS
58 0 0 -
MechSenger - Meshtastic / Armachat - with mechanical keyboard
58 0 0 -
-
-
PCB Rule with resistor color code, full color printed with the UV technology
274 0 3 -
Robot with WiFi control and servos driven by ESP32
142 0 1 -
Commodore 1551 Drive Cartridge Replacement
505 0 2 -
RCMHardwareByte-v2.3
339 0 0 -
Terminal Curiosity PCB Ruler
539 0 2 -
(DIY) COMMODORE 64 DEAD-TEST (781220) DIAGNOSTIC CARTRIDGE
554 0 2