Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
A component for the Open Source - Very Large Stick microcontroller system.
https://github.com/RightRudderLeftStick/OpenSource-VeryBigStick
This PCB allows you to easily breakout the required IO from either an Arduino Pro Micro or Bluepill STM32
This has been revised to version 1.5 which fixes a mistake a mistake in the nets (BTN14 and BTN4 were shorted) And in order to route the button I've had to reorder the IO pins from 1.4 so all the traces can fit.
I've also added 13 more button IO pins that work with Freejoy (MMJOY2 can use them for a button matrix).
This way you can take a 3d printed B8 grip and wire directly to each button.
https://www.thingiverse.com/thing:5764003
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by Right Rudder Left Stick
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
A component for the Open Source - Very Large Stick microcontroller system.https://github.com/RightRu...
-
Open Source Very Large Stick - SOFT CAM
A component for the Open Source - Very Large Stick Cam system.https://github.com/RightRudderLeftStic...
-
Open Source Very Large Stick - MEDIUM CAM
A component for the Open Source - Very Large Stick Cam system.https://github.com/RightRudderLeftStic...
-
Open Source Very Large Stick - HARD CAM
A component for the Open Source - Very Large Stick Cam system.https://github.com/RightRudderLeftStic...
-
-
Micro Planck - 3D Printable Low Profile Mechanical Keyboard
165 1 0 -
Corazon LED intermitente
54 0 0 -
-
