DIY Electronics
CAMBODIA • + Follow
Components
|
|
PIC16F628A |
x 1 | |
|
10K Trim-Pot |
x 1 | |
|
|
16x2 Character LCD |
x 1 | |
|
|
Connector 2-pin |
x 5 | |
|
|
Resistor |
x 3 | |
|
|
16 pins connector/header |
x 1 | |
|
|
RCA Connector |
x 1 | |
|
|
Switch |
x 2 |
Tools, APP Software Used etc.
|
Proteus 8 |
Description
PIC16F928A DIY 50MHz Frequency Meter
I use PIC16F628A programmed using CCS PICC to make a simple DIY frequency meter. It can measure up to 50MHz of digital signal. The total major components used in this kit is 17.
Code
Github
https://github.com/BongPeav/CCS-PICC/raw/master/Frequency_Counter_LCD.rar
Schematic and Layout
Visit this post
https://hangcafe.wordpress.com/2018/05/08/making-a-frequency-meter-using-pic16f628a-in-ccs-picc/
Mar 13,2022
1,951 views
PIC16F928A DIY 50MHz Frequency Meter
Making a simple frequency meter using PIC16F628A using a little C programming
1951
2
0
Published: Mar 13,2022
Download Gerber file 15
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by DIY Electronics
-
PIC16F876A RTC with seven segments display
I use PIC16F876A, DS1307, and 0.8 inch seven-segment display to make this digital clock. The firmwar...
-
PIC16F928A DIY 50MHz Frequency Meter
I use PIC16F628A programmed using CCS PICC to make a simple DIY frequency meter. It can measure up t...
-
ICL7107 DIY DVM
I use ICL7107 ADC chip with seven-segment display to design this simple DVM. It doesn't need any pro...
-
ATMega16 AVR Development Board For Students And Hobbyists
ATMega16 AVR Development Board For Students And HobbyistsOverviewAfter a few years of making the AVR...
-
Making a PCB UV Expose Timer Using PIC16F876A With MPLABX XC8
In this design, I use the following stuffs to make a timer work well for my personal use:A variable ...
-
A PCB Of The Stereo Audio Amplifier With TEA2025B
TEA2025B is a analog stereo audio amplifier with an output power up to 3W. It requires a single end ...
-
The PCB of a DIY CPLD experimental board with XC9572 and XC95108
This board requires a external JTAG cable to program the device. The JTAG cable could be a legacy co...
-
Making a small CPLD learning board with XC9536
XC9536 is a minimum CPLD of the XC9500 CPLD series. It come with 36 macro-cells with 800 available g...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
