|
KiCADKicad
|
PiStorm600
This is a Amiga 600 compatible rework of the original PiStorm Rev. B board. It clips over the 68000 CPU of the A600 using an inverted PLCC socket in the same way as many other A600 accelerators. Once fitted it disables the onboard CPU and allows the CPU emulator that it running on the Pi (Mushashi or Emu68) to take over.
For details on installation, bill of materials, and information regarding PLCC sockets and required modification, please head over to the project page on GitHub
https://github.com/LemaruX/PiStorm600
PiStorm600
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(17)
Log in to post comments.
Reply
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Lemaru
-
-
-
Modifying a Hotplate to a Reflow Solder Station
806 1 5 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
425 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1039 4 2 -
How to measure weight with Load Cell and HX711
661 0 3
