### DESCRIPTION

This is tiny clone of programmer AVR ISP MkII,based on LUFA project.Programmer is very small, but have a lot of opportunities comparing with original:you can power on programming device from usb when you flash it;outputs protected by HC244 buffer;USB type B is very strong - you dont crash your programmer.Also there is onboard 3,3V linear voltage regulator to power on 3,3V devices.

### TECHNICAL DETAILS / COMPONENTS

AT90USB162,74HC244,5050RGB,SMD2(5032) Crystal. All components are in BOM(included)

### LEARN / TOPIC / BUILD INSTRUCTIONS

When you mount all components, you need to flash firmware.If you dont have programmer like usbasp to flash firmware, you need to read http://www.atmel.com/images/doc7769.pdf

After flashing all works in Atmel Studio like original AVR ISP MkII.