Maurits Dijkmans
NETHERLANDS, THE • + Follow
Tools, APP Software Used etc.
|
Sprint-Layout 6 |
Description
Raspberry pi breakout board with I2C connetion and 3.3v
Wanting to mount a PoE hat and a 1.3" display gave me 2 options, soldering the wires to the PoE hat or drawing up a pcb that made it possible.
It's straight forward, a double row 2x20 long pin header/extender to connect between the pi and to your liking a angled or straight 2x20 pin connector for any extensions an a 4 pin connector for the I2C 3.3v and ground to connect my display.
Jan 16,2023
347 views
Raspberry pi breakout board with I2C connetion and 3.3v
Wanting to mount a PoE hat and a 1.3" display gave me 2 options, soldering the wires to th Poe hat or drawing up a pcb that made it possible
347
1
0
Published: Jan 16,2023
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-GPL
License.
Topic
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Maurits Dijkmans
-
EV charger connector as a powersource Type 2 Mennekens connector
EV charger connector as a powersource EU Type 2 Mennekens connectorI've made a cable before with the...
-
Raspberry pi breakout board with I2C connetion and 3.3v
Wanting to mount a PoE hat and a 1.3" display gave me 2 options, soldering the wires to the PoE hat ...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
