|
|
Wemos D1 Mini |
x 1 | |
|
|
18650 battery |
x 2 | |
|
|
DHT22 |
x 1 | |
|
|
Jumper Cables |
x 3 | |
|
|
Headers |
x 12 | |
|
|
470uF 16V Capacitor |
x 1 | |
|
|
DC power Jack socket 5.5 x 2.1 mm |
x 1 | |
|
|
18650 battery holder |
x 4 |
Room ambience monitor
This is a pcb for a room ambience monitor. It permit monitoring a room. I my case i'm monitoring temperature and humidity. It's prepared to connect three sensors, one I2C. It can work with a power supply or with two 16850 battery's.It uses a Wemos D1 Mini. Can be selected with a jumper. I've deploy one by room and they are connected by MQTT with HomeAssistant. I've detailed all the steps on my blog. It can be I detailed the entire process on my blog. can be consulted at https://space.groundzero.com.pt/room-monitor-for-homeassistant/
Room ambience monitor
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by Tiago Santos
-
Christmas Decoration
The PCB to create Christmas decorations with smd led's and a esp12e to replac the tree lights.
-
Bash Bunny DIY
This is based on Alex Jensen project (https://www.cron.dk/poor-mans-bash-bunny/) and on Hak5 Bash Bu...
-
Server room monitoring
I've design this project for monitoring a computer server room. All the infrastructure hardware (ser...
-
Room ambience monitor
This is a pcb for a room ambience monitor. It permit monitoring a room. I my case i'm monitoring tem...
-
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
203 4 1 -
How to measure weight with Load Cell and HX711
352 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
487 0 0 -
RGB LED Matrix input module for the Framework Laptop 16
761 0 2
