Top Overlay
Top Copper Layer
Bottom Overlay
Bottom Copper Layer
Bottom
S005-3034 analogue switch DG449DS-T1-E3 breakout module
### DESCRIPTION
analogue switch DG449DS-T1-E3
### TECHNICAL DETAILS / COMPONENTS
analogue switch DG449DS-T1-E3
### LEARN / TOPIC / BUILD INSTRUCTIONS
The DG449 is a dual supply single-pole/double-throw (SPDT) switches. On resistance is 38 ? and flatness is 2.6 ? max over the specified analog signal range. These analog switches were designed to provide high speed, low error switching of precision analog signals. The primary application areas are in the routing and switching in telecommunications and test equipment. Combining low power, low leakages, low on-resistance and small physical size, the DG449 is also ideally suited for portable and battery powered industrial and smart equipment. The DG449 operates either from a single + 7 V to 36 V supply or from dual ± 4.5 V to ± 20 V supplies. It is offered in the very popular, small SOT23-8 package.
https://www.digikey.com/product-detail/en/vishay-siliconix/DG449DS-T1-E3/DG449DS-T1-E3CT-ND/1850076
by
Chayut Orapinpatipat
Q2HHEXV0T3JHCGLUCGF0AXBHDA==
S005-3034 analogue switch DG449DS-T1-E3 breakout module
- Comments(0)
- Likes(0)
More by Chayut Orapinpatipat
-
Battery connector JST/Molex 3-ways
Battery connector JST/Molex 3-waysS3B-PH-SM4-TB(LF)(SN)Molex 15-91-2035Q2hheXV0T3JhcGlucGF0aXBhdA==
-
RJ-45 Breakout module
RJ-45 Breakout module - breadboard. Jack Modular Connector 8p8c (RJ45, Ethernet) 90° Angle (Right) S...
-
PCB heating coil, inductive coil
PCB heating coil, inductive coilwith 6 mil coil trace on both layers of the PCB,24.5 Ohm resistance3...
-
ESP32 programmer
ESP32 board programmer with EN and IO0 pin button. 6-ways header FFC to target board. each button wi...
-
Breakout board INFENEON KP236N6165 Absolute pressure sensor
Breakout board INFENEON KP236N6165 Absolute pressure sensor,breadboardable. 100mil pitch standard he...
-
1.00 mm SMT ZIF 6 way breakout board.
1.00 mm SMT ZIF 6 way breakout board. including 100mil headers for breadboardingWR-FPC 1.00 mm SMT Z...
-
LC05111CMT 1-Cell LiIon Battery Protection IC with MOSFET
LC05111CMT1-Cell Lithium-Ion Battery Protection IC with Integrated Power MOSFETThe LC05111CMT is a p...
-
S005-3055 PCF8523 RTC
The PCF8523 is a CMOS1 Real-Time Clock (RTC) and calendar optimized for low power consumption. Data ...
-
SD card breakout PCB module.
### DESCRIPTIONuseful breakout board for Sd card. good for breadboard prototyping. Sd card housing p...
-
Letter R
### DESCRIPTIONLetter R in "MERRY XMAS" setone of the 7 Letters in the charactereach WS281...
-
Letter-M
### DESCRIPTIONLetter M in "MERRY XMAS" setone of the 7 Letters in the charactereach WS281...
-
S005-3039 ESP-WROOM-32 Breakout PCB
breakout module for ESP32-WROOM-32. each pin of ESP32 directly connect to header pin.. Optional LDO ...
-
S005-3034 analogue switch DG449DS-T1-E3 breakout module
### DESCRIPTIONanalogue switch DG449DS-T1-E3### TECHNICAL DETAILS / COMPONENTSanalogue switch DG449D...
-
S005-3037 5V boost conv TPS613222A
5V boost conv TPS613222Ahttp://www.ti.com/product/TPS61322The TPS61322 is a synchronous boost conver...
-
8x4 5mm LED Array V2
DESCRIPTION8x4 5mm LED Array V2with 8 individual current limiting resistor. landing pads for dc jack...
-
NPA amphenal GE pressure sensor Breakout
DESCRIPTIONNPA Breakout module for NPA amphenal GE sensor. Pressure sensorsWarning: all layers are m...
-
0603 LED strip with 7 LED
### DESCRIPTION0603 LED strip with 7 LED with current limiting resistors. also comes with landing pa...
-
JTAG to SWD converter
DESCRIPTIONConvert JTAG header to SWD pins### TECHNICAL DETAILS / COMPONENTS### LEARN / TOPIC / BUIL...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
