Luca Dentella's Profile - Engineer - PCBWay Community

Luca Dentella

Recommended

A portable, NFC controlled, MP3 player.
NFCMusicPlayer
3100
SoundShield This is an Arduino shield designed to implement a DCC Accessory Decoder to play audio tracks.It can play an unlimited number of tracks thanks to a JQ6500 audio module with built-in flash m...
SoundShield
121902
ServoDecoderShieldThis is an Arduino shield designed to implement a DCC Accessory Decoder for servos.It can drive up to 16 servos, using a PCA9685 expansion board.You can easily program servo position...
ServoDecoderShield
197982
This board was designed for those who has a power supply that cannot provide enough current to move solenoid actuators.In rest condition, it can store the current in the large capacitor and, when need...
CDU (Capacitor Discharge Unit)
154100
This board, based on the L293D H-Bridge, can interface up to 2 point motors to Arduino.It was designed to create, with Arduino and a DCC interface, an accessory decoder to control turnouts in a model ...
PointMotorBoard
85600
MosfetBoard is a simple board, with 2 logic-level MOSFETs (IRL530) to control with Arduino a model railway turnout using solenoid motors.
MosfetBoard
90900
Loconet interfaceLoconet is a bus to control digital model railways.Using this interface, it is possible to connect a 5v microcontroller (Arduino...) to the bus.Moreover, this interface can:provide 12...
Loconet interface
8715171
esp32s2Stick is a USB device based on the esp32-s2 chip by Espressif.Thanks to the presence of an USB OTG interface, it is possible to program the chip to act as a USB peripheral (mass ...
esp32s2Stick
518806
BoosterBoard has been designed for my "DCC model railway with Arduino" tutorial. The goal is to offer a plug'n'play board to create a powerful DCC booster or command station with only few external com...
DCC BoosterBoard
669857

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on