Sega Master System Quick Solder BIOS v1.2
The SEGA Master System Quick Solder BIOS is an additional BIOS that can solder beneath the original BIOS to enable multiBIOS operation. It is designed to compliment the switchless region & BIOS support mod kits which can enable the BIOS when set for the extended region modes. Combined with the switchless region & BIOS support mod kit, the BIOS is operated switchlessly. It can also be installed conventionally with a switch, but that would be silly.
Requirements
1 - A SEGA Master System with a 28-Pin BIOS.
AND
2 - A switchless region & BIOS support mod kit installed (for switchless operation).
OR
2 - A SPDT (On-On) switch and 2 x 1-kilohm Resistors (for switch operation)
Compatibility
Currently it only supports piggybacking on a 28-Pin BIOS. 32-Pin BIOS support will be added, if possible.
It should work with any Master System with a 28-Pin BIOS.
Manufacturing
- 1mm or 0.8mm PCB thickness are both fine.
- Castellated vias is recommended. Thin PCBs with non-castellated half cut vias don't generally result in torn up copper plating but cleaning the vias can be a time consuming chore.
Future Work
- 32-Pin BIOS support
Version History
- Quick Solder BIOS v1.0 - 19/11/2022
- Quick solder BIOS v1.1 - 06/05/2023
- Quick solder BIOS v1.2 - 23/02/2024
Sega Master System Quick Solder BIOS v1.2
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Consoles Unleashed
- Sega Master System RGB Encoder Switcher Z80 QSB v1.2 The Master System RGB Encoder Switcher is designed to allow a Master System to be modded for true PA...
- Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1 The multi output frequency oscillator (MOFO) is a dual clock mod for the Sony PlayStation that provi...
- Nintendo GameCube SD2SP2 MicroSD Card Adapter An aesthetically upgraded version of Citrus3000psi's Nintendo GameCube SD2SP2 v1.2a.Read more about ...
- Nintendo 64 AV Multiout Breakout PCB v1.1 A simple little PCB to help when RGB modding an N64. Add this little PCB to the multiout’s PCB pins ...
- Sega Master System Quick Solder BIOS v1.2 The SEGA Master System Quick Solder BIOS is an additional BIOS that can solder beneath the original ...
- 9-Pin Mini DIN Breakout PCB v1 A simple 9-Pin Mini DIN breakout PCB for AV modding consoles. Uses standard Sega Mega Drive 2 signal...
- Sony PlayStation X-Reset 750X v1.1 X-Reset is a stylish in-game-reset mod for the Sony PlayStation which uses a controller button combi...
- Sony PlayStation SIO-XS PSIO Switchboard v1.1 SIO-X is an elegant PSIO switchboard designed by Voultar to make switchboard installs simpler and ne...
-
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-