Stereo class T Amplifier
Class T amplifiers are known for their good sound and high efficiency.
The chip I use is TA2020-020 with an output power of around 2x20Watt stereo or up to 2x25Wrms @ 4Ω, VDD=14.6V if you look at the datasheet
The power supply required is a single DC supply ranging from 8.5 to 14.6 with a recommended reference of 13.5V
Dont forget the jumper to connect digital ground to analog ground and jumper for the start/sleep pads to run the amp
How does it sound? Please check the video on the Barlex Respectaizer Youtube Channel
Stereo class T Amplifier
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by barita
-
Simple audio limiter
This limiter circuit use to avoid clips on a mid-power amp.It controll and decrease the input of amp...
-
TIP 41/42 Mini Amplifier SMD
The project uses TIP41/42 as the final amplifier, the circuit is made as simple as possible with SMD...
-
LM3875 Amplifier
This module is a mono board, so you can make 2 board for stereo or 6 board for 5.1, very recommend t...
-
GOLD-FI Preamp
This circuit use a dual op-amp chip for one channel, it works on parallel mode. So it need two op-am...
-
DIY 5.1 Amplifier TPA3116D2
In this project I make a 5.1 amplifier using the TPA3116D2 chip.This amplifier can produce high powe...
-
Subwoofer amplifier STK4044V
This subwoofer amplifier using the STK4044V chip, because this chip very low distortion with THD 0.0...
-
DIY Third Order Lowpass Filter PT2351
This lowpass filter PT2351 run in third order with -18dB /oct slope, it means that the resulting sig...
-
STK426-530 STEREO AMPLIFIER
In this project I want to make an amplifier using the STK426-530 chip that which is often used in hi...
-
KIA6210AH STEREO AMPLIFIER
In this project I want to make a stereo amplifier using the KIA6210ah chip.This chip is capable of p...
-
Class A amplifier IRF610
Very simple class a amplifier with the basic mosfet amp scheme found from google and I modified it u...
-
DIY LM383T Stereo Amplifiier
This chip is very rare on the market. Based on datasheet, this chip capable of producing 7Watt/chann...
-
Stereo TDA1554Q Amplifier
This chip is capable of producing 2x22Watt power to drive 4-6 inch speakers.Surprisingly, this TDA15...
-
DIY STEREO RCA TO BALANCE XLR CONVERTER
Stereo KONVERTER from Unbalance signal to Balance signal for many purposes of audio.The unbalance in...
-
Stereo TPA3116D2 Amplifier
Stereo amp using TPA3116D2 chip in dual pbtl which has a great power output about 2x100 watts Max.Th...
-
STEREO LM4766 AMPLIFIER
Stereo amp using the Gainclone LM4766 chip which has a great power output about 2x40 watts.The PCB t...
-
STEREO AMPLIFIER TPA3255 CLASS D
Simple powerfull class D amplifier using TPA3255 chip.This amplifier can produces power up to 2x315W...
-
Digital active cross over 2.1
This is a simple 2.1 digital active cross over using PT2353H chip.This active cross over have some m...
-
Stereo TDA7266 Mini Amplifier
This TDA7266 Chip Amplifier can produce 14Watt Stereo power (2x7Watt) with a single supply 12V
-
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
146 0 0 -
