barita
INDONESIA • + Follow
Edit Project
Description
DIY 5.1 Amplifier TPA3116D2
In this project I make a 5.1 amplifier using the TPA3116D2 chip.
This amplifier can produce high power maximum 600Watt (make sure your power supply enough)
It use UPC1891 as the matrix surround processor.
There are some menus on this amplifier :
- Front Volume Level
- Center Volume Level
- Subwoofer Volume Level
- Surround/Rear Volume Level
- Effect Level
- Main Volume Level
- Music and Movie Mode
You need a DC 12V-20V Voltage source for this amplifier
Please check the video on Barlex Respectaizer Youtube Channel
Sep 14,2024
32 views
DIY 5.1 Amplifier TPA3116D2
DIY 5.1 Amplifier TPA3116D2 with UPC1891 Surround Processor
32
0
0
Published: Sep 14,2024
Download Gerber file 3
BOM(Bill of materials)
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by barita
- Simple audio limiter This limiter circuit use to avoid clips on a mid-power amp.It controll and decrease the input of amp...
- TIP 41/42 Mini Amplifier SMD The project uses TIP41/42 as the final amplifier, the circuit is made as simple as possible with SMD...
- DIY 5.1 Amplifier TPA3116D2 In this project I make a 5.1 amplifier using the TPA3116D2 chip.This amplifier can produce high powe...
- Subwoofer amplifier STK4044V This subwoofer amplifier using the STK4044V chip, because this chip very low distortion with THD 0.0...
- DIY Third Order Lowpass Filter PT2351 This lowpass filter PT2351 run in third order with -18dB /oct slope, it means that the resulting sig...
- STK426-530 STEREO AMPLIFIER In this project I want to make an amplifier using the STK426-530 chip that which is often used in hi...
- KIA6210AH STEREO AMPLIFIER In this project I want to make a stereo amplifier using the KIA6210ah chip.This chip is capable of p...
- Class A amplifier IRF610 Very simple class a amplifier with the basic mosfet amp scheme found from google and I modified it u...
- DIY LM383T Stereo Amplifiier This chip is very rare on the market. Based on datasheet, this chip capable of producing 7Watt/chann...
- Stereo TDA1554Q Amplifier This chip is capable of producing 2x22Watt power to drive 4-6 inch speakers.Surprisingly, this TDA15...
- DIY STEREO RCA TO BALANCE XLR CONVERTER Stereo KONVERTER from Unbalance signal to Balance signal for many purposes of audio.The unbalance in...
- Stereo TPA3116D2 Amplifier Stereo amp using TPA3116D2 chip in dual pbtl which has a great power output about 2x100 watts Max.Th...
- STEREO LM4766 AMPLIFIER Stereo amp using the Gainclone LM4766 chip which has a great power output about 2x40 watts.The PCB t...
- STEREO AMPLIFIER TPA3255 CLASS D Simple powerfull class D amplifier using TPA3255 chip.This amplifier can produces power up to 2x315W...
- Digital active cross over 2.1 This is a simple 2.1 digital active cross over using PT2353H chip.This active cross over have some m...
- Stereo TDA7266 Mini Amplifier This TDA7266 Chip Amplifier can produce 14Watt Stereo power (2x7Watt) with a single supply 12V
- STK4152 AMPLIFIER Without Tone This board for STK4152II Stereo amplifier. You can also use the other STK41X2 Chip with this board, ...
- Stereo TDA7377 Amplifier TDA7377 Sereo Standart
You may also like