Strobe LED (Power Led, Strip Led, Multi Mode)
Hi,
The Strobe Led Lamp circuit has 16 effect modes selected with the button built on the PIC12F675 microcontroller. Since the selected mode is stored in the integrated eeprom, the selected mode remains in memory when the power is cut off. The source is Picbasic Pro software. You can adjust the lighting times of the LEDs and make different combinations.
There are 4 LEDs on the left and right channel on the Led Flashing Lamp module. You can use high-power 5mm LEDs. PIC12F675 outputs are powered by 50N06 MOSFETs, and can take up to 3 amps per channel.
https://320volt.com/cakar-lamba-led-16-mod/
Strobe LED (Power Led, Strip Led, Multi Mode)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(3)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by burhan
-
Washing Machine Motor Control Speed-Power Lathe Machine Saw
Hi, A simple and inexpensive circuit to start the washing machine engine externally. Soft start, Spe...
-
Valentine's day project 2 RGB Led Heart
Hi,PIC12F629 RGB Led Moon Light multi effecthttps://320volt.com/rgb-led-kalp-devresi-pic12f629-mood-...
-
200W Power Amplifier
200W Amplifier circuit does not require quiescent current adjustment.200W RMS with 4-OHM speaker100W...
-
Valentine's day project
Atmega8 led heart, df player music box, rgb mood light demo cardboard box :) https://320volt.com/l...
-
AT-ATX Power Supply Car Battery Charger Mod
Hi, a modification to convert an old generation ATX or older AT computer power supply into a 4AH..10...
-
Pulse Desulfator v2
Hi, New PCB 100x50mm You can use it on an external or running system. Battery maintenance sulfur rem...
-
Cordless Drill Self OSC SMPS (AT-ATX Transformator no rewinding required)
Hi, Cheap, simple switching power supply SMPS circuit was tested with a cordless drill, current was ...
-
4 Mosfet Electronic Load
Hi, The basic circuit form isTL431Provide reference voltage，Current detection resistance LM324.https...
-
Pulse De-sulfator for Lead-Acid Battery Resurrection
Hi, You can use it on an external or running system. Battery maintenance sulfur remover Desulphator ...
-
Battery Discharge Protection
A simple battery discharge protection circuit implemented with TL431, BC557 transistors and a small ...
-
Simple Access Control - Without Arduino
A project using RFID-RC522 module and PIC16F628A to perform access control with RFID Key cards. Adap...
-
TDA2030 Bridge - Single Supply
Hello, TDA2030 Bridge connection. More power with 2 integrated single source 12V-32V.https://320volt...
-
SMPS Transformer Tester
Here’s the design for a low cost, easy to build and use battery operated ‘shorted turns’ tester for ...
-
200-500w Driver
Hello, I designed a new pcb for a quality amplifier circuit, I tested it, the sound is good, the bas...
-
Quasi Complementary Amplifier
Hello, more stable, stable version of the 100 Watt Mono Semi-Complementary Amplifier, known in Colom...
-
PT2314 Arduino LCD2004 Spectrum Analyzer Remote Control Encoder
Control of PT2314 sound processor with Arduino nano. All controls can be done with encoder and two b...
-
5.1 Digital Audio Control Circuit
5.1 Control board project for sound system Bass, treble, mid, 3D effect, volume control of all chann...
-
Combination Lock Circuit
Electronic combination lock circuit. It is simpler and easier to implement than systems with indicat...
-
-
Black Falcon FPV EDF RC Plane! Only free on pcbway!
47 0 0 -
-
-
