Nick
UNITED STATES OF AMERICA • + Follow
Edit Project
Tools, APP Software Used etc.
|
KiCad 8.0KiCad
|
Description
Super Nintendo Advanced Flash Cartridge - HiROM
This is a new and improved Super Nintendo cartridge circuit board design that is capable of being flashed via the Open Source Cart Reader (OSCR) by sanni. Alternatively, you can also flash the ROM chips before soldering them to the board through the use of a programmer like the T48 programmer with the TSOP48 adapter. This cartridge is made entirely from brand new off the shelf components. No donors are required, and you don't need to rely on AliExpress or eBay for parts!
This is the HiROM-only variant of the Advanced Flash cartridge.
Please view more information at the GitHub before ordering circuit boards. As of writing, this version is UNTESTED.
Important Board Characteristics:
Thickness: 1.2mm
Surface Finish: ENIG
Gold Fingers: Yes, 30° chamfer
Oct 21,2024
20 views
Super Nintendo Advanced Flash Cartridge - HiROM
2 Layers PCB 77.7 x 116.2 mm FR-4, 1.2 mm, 1, Immersion gold, Green Solder Mask, White silkscreen
A flashable cartridge circuit board for the Super Nintendo
20
0
0
Published: Oct 21,2024
Download Gerber file 1
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Nick
- Super Nintendo Advanced Flash Cartridge This is a new and improved Super Nintendo cartridge circuit board design that is capable of being fl...
- Super Nintendo Advanced Flash Cartridge - HiROM This is a new and improved Super Nintendo cartridge circuit board design that is capable of being fl...
- Super Nintendo Advanced Flash Cartridge - LoROM This is a new and improved Super Nintendo cartridge circuit board design that is capable of being fl...
- Game Boy MBC5 Cartridge (Type A, FRAM) A flashable MBC5 Game Boy cartridge that uses the M29F160 and FRAM. I suggest using this board for n...
- Super Game Boy Plus This is the Super Game Boy Plus, or SGB+. It is a circuit board that allows you to enhance an origin...
- Game Boy MBC5 Multicart YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC5-based multi...
- Game Boy MBC3 Multicart YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC3-based multi...
- Game Boy MBC5 Cartridge YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC5-based cartr...
- Game Boy MBC3 Cartridge YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC3-based cartr...
- Game Boy MBC1 Cartridge YOU MUST ORDER WITH ENIG FINISH AT 0.8MM THICKNESS!This is my design of a flashable MBC1-based cartr...
- Pocket Mouse Power Board This board was made primarily for my Pocket Color project (MGBC-MBL-01). The Pocket Color is a Game ...
- Game Boy Pocket Color (MGBC-MBL-01): Half-silkscreen version Thickness must be 1.0mm! If you do not plan to use tactile buttons, you must order ENIG finish! Plea...
- Game Boy Pocket Color (MGBC-MBL-01): Solid color version Thickness must be 1.0mm! If you do not plan to use tactile buttons, you must order ENIG finish! Plea...
- Game Boy DMG Color (DMGC-HDP-01) Please review information in the GitHub repo!!This is the HDP (headphone) board (one of four PCBs) f...
- Game Boy DMG Color (DMGC-PWR-01) Thickness must be 1.2mm or less! Please review information in the GitHub repo!!This is the PWR board...
- Game Boy DMG Color (DMGC-IPS-01) Thickness must be 1.2mm! Please review information in the GitHub repo!!This is the IPS board (one of...
- Game Boy DMG Color (DMGC-CPU-01) Thickness must be 1.2mm! Please review information in the GitHub repo!!This is the CPU board (one of...
You may also like
-
-
-
Creative Micro Designs Inc. CMD HD-4000 Hard Drive Metal Case
57 0 1 -
GenMDM little-scale clone with 3.5mm trs MIDI in
30 0 0 -
Pedro 2.0 - Build the world’s first robot that requires no tools, no screws—just your hands and creativity!
187 1 0