Jonathan David
COLOMBIA • + Follow
Description
Symmetrical high power source
500W symmetrical source for the TDA8954TH amplifier, this source is prepared to give peaks of up to 10 amps, it has a 25 amp rectifier bridge to ensure correct rectification and current peaks, it has four capacitors of 4700 uf at 50v, recognizing to weld with a generous amount of tin to ensure a strong joint and also improve conductivity, I recommend using the best quality bridge rectifiers and capacitors.
Oct 27,2020
1,222 views
Symmetrical high power source
high power source for the TDA8954TH
1222
0
0
Published: Oct 27,2020
Download Gerber file 15
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Jonathan David
-
Soic 16 to Dip adaptor
This adapter will facilitate the use of these integrated surface allowing the use of them in breadbo...
-
Soic 8 to Dip adapter
This adapter will facilitate the use of these integrated surface allowing the use of them in breadbo...
-
LQFP208 to DIP adapter
this is a LQFP208 to DIP adapter board
-
LQFP100 to DIP adapter
this is an adapter plate from LQFP100 to Dip, I designed it mainly because these plates are very dif...
-
Symmetrical high power source
500W symmetrical source for the TDA8954TH amplifier, this source is prepared to give peaks of up to ...
You may also like
-
-
-
DIY Transistor Tester | Build Your Own LCR Meter at Home with Arduino Nano
13 0 0 -
-
ESP32-S3 breakout board for motorizing Iron Man helmets
108 0 2 -
-
-
