Paul Versteeg
NETHERLANDS, THE • + Follow
Description
VBA Curve Tracer (1 of 4)
This is the main board for a Curve Tracer.
The project is described in full detail on my Blog here: https://www.paulvdiyblogs.net/2022/06/the-vba-curve-tracer.html
All relevant files (Gerbers, BOM's, build instructions, etc) can be found on my Github site here: https://github.com/paulvee/VBA-Curve-Tracer
This is the same project Mark Allie published in shared projects as well.
Sep 28,2023
579 views
VBA Curve Tracer (1 of 4)
2 Layers PCB 145 x 240.6 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
This is a DIY project to build a professional instrument that can make many of the measurements a Tektronix 577 can make.
579
1
0
Published: Sep 28,2023
Download Gerber file 9
BOM(Bill of materials)
Centroid file
PCBWay Donate 10% cost To Author
File Last Updated: 2023/10/03 (GMT+8)
File update record
2023-10-0316:34:59
Centroid file is updated.
2023-10-0316:34:59
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Paul Versteeg
-
SPI bus isolator
I needed a galvanically separated SPI interface between an ESP32 and an OLED display board.The volta...
-
DiY Dynamic DC Load - Back Plate (3 of 3)
This is the Back Plate/Back Panel for a DIY Dynamic Load instrument
-
DIY Dynamic DC Load - Face Plate (2 of 3)
This is the Face Plate/Front Panel for a DIY DC Dynamic Load instrument
-
DIY Dynamic DC Load (1 of 3)
This is a DIY Dynamic Load instrument that can do many things professional instruments can do too.It...
-
10MHz frequency reference 2 of 2
This is the front panel PCB used for the 10MHz frequency reference.More details can be found on my B...
-
10MHz OCXO frequency reference 1 of 2
This is part of a 10MHz frequency reference that is based on an OCXO.The project is described in det...
-
10MHz GPSDO V4.1 (4 of 4)
This is the front panel for a high precision GPSDO ( GPS (GNSS) Disciplined Oscillator) with an outp...
-
10MHz GPSDO V4.1 (3 of 4)
This is the front panel for a high precision GPSDO ( GPS (GNSS) Disciplined Oscillator) with an outp...
-
10MHZ GPSDO V4.1 (2 of 4)
This is the output and interface board for a high precision GPSDO ( GPS (GNSS) Disciplined Oscillato...
-
10MHz GPSDO V4.2 (1 of 4)
This is a high precision GPSDO ( GPS (GNSS) Disciplined Oscillator) with an output frequency of 10MH...
-
100MHz Differential Probe - 240V
This is a joint project to build a differential probe that has a bandwidth of about 100MHz.The probe...
-
VBA Curve Tracer (4 of 4)
This is the back plate for a Curve Tracer.The project is described in full detail on my Blog here: h...
-
VBA Curve Tracer (3 of 4)
This is the front panel for a Curve Tracer.The project is described in full detail on my Blog here: ...
-
VBA Curve Tracer (2 of 4)
This is the front board for a Curve Tracer.The project is described in full detail on my Blog here: ...
-
VBA Curve Tracer (1 of 4)
This is the main board for a Curve Tracer.The project is described in full detail on my Blog here: h...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
