Tools, APP Software Used etc.
|
KiCADKicad
|
Description
The NuTube Adaptor Board.kicad_pcb
Due to its small pin pitch I made this little adaptor to convert it to 2.54mm used by most breadboards.
Mounting holes are also available to add stand off if you think you require stabilisation.
Jul 27,2023
363 views
The NuTube Adaptor Board.kicad_pcb
2 Layers PCB 45.7 x 51.4 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
Convert your Korg Nutube to 2.54mm pin pitch.
363
0
0
Published: Jul 27,2023
Download Gerber file 1
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Matt
-
The NuTube Adaptor Board.kicad_pcb
Due to its small pin pitch I made this little adaptor to convert it to 2.54mm used by most breadboar...
-
Decade Resistor Box By RNA
All you need to add are 5x Lorlin CK1059 switches with the knobs of your choice. It is designed to ...
-
8 Channel Balanced I/O to Bread board Interface
Needing to get balanced audio lines to the bread board can be a simple task.This PCB was designed to...
You may also like
-
-
-
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
231 0 0 -
