Attila Sajtos
HUNGARY • + Follow
Top Solder Mask
Top Overlay
Top Copper Layer
Bottom Solder Mask
Bottom Overlay
Bottom Copper Layer
Bottom
Description
V4_Mk14
V4 power amplifier. Usable up to 200W/4ohm
Component values are noted on the pcb
http://www.diyaudio.com/forums/solid-state/297606-v6-amplifier.html
Jun 08,2018
2,292 views
V4_Mk14
2 Layers PCB 90 x 100 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
2292
4
0
Published: Jun 08,2018
Download Gerber file 61
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(4)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Attila Sajtos
-
V4_Mk14
V4 power amplifier. Usable up to 200W/4ohmComponent values are noted on the pcbhttp://www.diyaudio.c...
-
V4_70/120W amplifier
### DESCRIPTION 70W/8ohm, 120W/4ohm high quality power amplifier. Frequency range 2Hz-270kHz. Distor...
-
PSU
### DESCRIPTION: Power supply for audio power amplifier### TECHNICAL DETAILS / COMPONENTS: Allcompon...
-
V4Mk8 project
140W/8ohm 250W/4ohm audio power amplifierTHD less than 0.05% at full output power on 8ohms. Gain 24d...
You may also like
-
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
199 0 0 -
RGB LED Matrix input module for the Framework Laptop 16
395 0 2 -
-
-
-
