|
|
Pro Micro with type-C |
x 1 | |
|
|
PS/2 Keyboard connector |
x 1 | |
|
|
Carbon Film Resistor 4.7kohm(1/4W) |
x 2 | |
|
|
3ple Decker Arduino Case(Low) (Color: Smoke) |
x 1 |
|
arduino IDEArduino
|
hoboNicola for PS/2 Keyboard FMV-KB611
This adapter applies to FMV-KB611 released by Fujitsu. This keyboard has built-in thumb shift firmware, but the adapter disables this and makes it work as a regular JIS keyboard. The adapter internally converts to thumb shift and sends the Roman code to the computer.
The adapter's firmware is based on hoboNicola and has been modified to suit the operation of the FMV-KB611. Testing is performed using Microsoft's MS-IME.
[Note] Pro Micro shorts solder jumpers to operate at 5V.
This project only supplies the PCB and has nothing to do with the firmware developers. The firmware is released under the GPL license.
hoboNicola for PS/2 Keyboard FMV-KB611
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Sumio Koseki
-
hoboNicola for Skyloong GK68 Keyboard
This keyboard adapter applies to GK68 released by Skyloong. The adapter internally converts to thumb...
-
hoboNicola for PS/2 Keyboard FMV-KB611
This adapter applies to FMV-KB611 released by Fujitsu. This keyboard has built-in thumb shift firmwa...
-
LoRa E220(JP) Shield
This shield is for evaluate EByte LoRa module E220 with Arduino.※I/O voltage is +5V. Please check th...
-
hoboNicola for XIAO RP2040
This adapter converts your keyboard into a thumb shift keyboard. The shape is designed to fit plasti...
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
39 0 0 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
47 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
59 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
360 0 5 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
117 0 2
