Mathew McBride
AUSTRALIA • + Follow
Edit Project
Components
![]() |
75915-308GLFAmphenol FCI
|
x 2 | |
![]() |
G800W305018EUAmphenol Commercial Products
|
x 2 | |
![]() |
60900213421Wurth Elektronik
|
x 2 | |
|
Samtec FLE-113-01-G-DV-ASamtec
|
x 1 |
Tools, APP Software Used etc.
![]() |
AltiumAltium
|
Description
mikroBUS adapter board for Traverse Ten64
This is a simple adapter/interposer which allows mikroBUS plug-in boards ("clicks") to be used with the Ten64.
Compatible functions
This adapter board is best suited for clicks that only use:
- I2C
- UART
- GPIO
SPI can be used with GPIO bitbanging (tested with Temp & Hum 16) but is otherwise not recommended.
Ten64 does not have any analogue or PWM functions on it's GPIOs.
mikroBUS pins CS and INT can be changed between 4-wire UART and GPIO depending on designed function with a jumper.
Tested Boards
Dec 17,2021
1,481 views
end-flag
mikroBUS adapter board for Traverse Ten64
2 Layers PCB 30 x 36.83 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
This adapter board allows the use of mikroBUS boards ("clicks") on the Ten64 board.
1481
0
0
Published: Dec 17,2021
Download Gerber file 8
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.

Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen(Without Speaker)
BUY NOW
Topic
- Comments(0)
- Likes(0)

Upload photo
0 / 10000
It looks like you have not written anything. Please add a comment and try again.
You can upload up to 5 images!
Image size should not exceed 2MB!
File format not supported!
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Mathew McBride
-
mikroBUS adapter board for Traverse Ten64 This is a simple adapter/interposer which allows mikroBUS plug-in boards ("clicks") to be used with ...
-
GPIO Breakout board for Traverse Technologies Ten64 appliance This is a simple breakout PCB for the Ten64 which converts the 26-pin, 1.27mm/0.050" pitch GPIO/Cont...
You may also like
-
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
38 0 0 -
-
Nintendo 64DD Replacement Shell
142 0 1 -
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
250 4 1 -
How to measure weight with Load Cell and HX711
369 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
502 0 0